Pics of 10" wheels and tires??

[GE4x4]

Just wondering if any have the 10" ITP wheels on there 700xx, and if so, can I see a pic of them? Also, how wide is it in the rear with these wheels?

[OzLinc]

ITP say that their 700XX wheel is a +1" offset from stock.

BUT aftermarket 10" tires are also wider than stock so that makes it another inch wider again.......

I think this whole setup is a +2" per side deal.

Linc

[GE4x4]

I saw that pic on the ITP site, but really didn't get a good rear view. Plus I don't know the width of the rear in stock form, but it sounds like this would make it about 4" wider?

[OzLinc]

Originally posted by GE4x4
I saw that pic on the ITP site, but really didn't get a good rear view. Plus I don't know the width of the rear in stock form, but it sounds like this would make it about 4" wider?

I would agree; I "guess" about 4" wider in total is about right. Notice the wide offset fronts they used just to balance out the pic, if they 4/1's it would look stupid.

Linc

[scuzz]

I'll take some pics tomorrow with my paddles on.

K?

[scuzz]

OK, here's what I found:

Stock width 46 inches.

Width with ITP rims 49 inches.


Here's the pictures:

http://i82.photobucket.com/albums/j254/gwwaddle/TRX700XX/100_9262.jpg

The balloon paddles sure do look skinny. (YES, I KNOW I PUT THEM ON THE WRONG SIDE....THEY WERE ONLY FINGER TIGHT.)

http://i82.photobucket.com/albums/j254/gwwaddle/TRX700XX/100_9267.jpg

Close clearance:

http://i82.photobucket.com/albums/j254/gwwaddle/TRX700XX/100_9265.jpg

http://i82.photobucket.com/albums/j254/gwwaddle/TRX700XX/100_9266.jpg

[scuzz]

http://i82.photobucket.com/albums/j254/gwwaddle/TRX700XX/100_9271.jpg

http://i82.photobucket.com/albums/j254/gwwaddle/TRX700XX/100_9264.jpg

[scuzz]

Also, for what it's worth...

Straight paddles + wider rear = even worse slow speed turning/doughnuts.