aftermareket 2004 rear grab bar?????

[H400DAN2004]

hey guys. when i bought my 2004 h 400 ex the rear grab bar was a little bent. i had thought it was connected to the frame and could not be replaced but i then noticed when i had the rear fender off that it was bolted to the actual frame. so my question is do the make a nice replacement grab bar for this quad or am i S.O.L.

thanks and if you dont mind maybe post some pics of what ones you have that replace the stock rear grab bar.

the grab bar is part of the subframe...you can replace that part or depending on how badly the grab bar is bent, you can get one from rpm that uses u-bolts to hold the grab bar onto the subframe

[H400DAN2004]

Originally posted by speedyquad
the grab bar is part of the subframe...you can replace that part or depending on how badly the grab bar is bent, you can get one from rpm that uses u-bolts to hold the grab bar onto the subframe

yea i would rather replace it.

that would be honda part number 50200-HN1-000ZB at about $260 new...you can find a used one somewhere, but you take the achnce that it is also bent so...

[H400DAN2004]

Originally posted by speedyquad
that would be honda part number 50200-HN1-000ZB at about $260 new...you can find a used one somewhere, but you take the achnce that it is also bent so...

thank you for that number. do they make an aftermarket one or am i stuck with the stock one only. that is a pricey part.

[the Z Man]

You can also cut it off, drill some holes in the sub frame and mount an aftermarket one on....
Make sure you put a spacer in the frame to keep it from squishing together.

[brian76708]

Originally posted by H400DAN2004
thank you for that number. do they make an aftermarket one or am i stuck with the stock one only. that is a pricey part.

if you think thats expensive look at the lsr one

http://www.lsracing.com/honda-400ex_sub-frame-honda-400ex.html

[H400DAN2004]

damn 370 wow.


i think i may cut it off and put a rpm products 250r one on. ill have to see if i can do it.

if anyone has done this please post up some pics. thanks and thanks to the above posts for your help