PDA

View Full Version : back fire



scottsworld
01-25-2009, 07:12 AM
i just got a crf450 hybrid and it it popping really bad and blowing flames out the exhuast i tried bigger jets and moved the needle clip up and down and it still does it. i was told the valves were just cut so could they have seated or not be adjusted right and cuz this

scottsworld
01-25-2009, 09:43 AM
little help please

Sjorge450R
01-25-2009, 10:27 AM
scott what size pilot is in there? (or leak jet if its a FCR)

scottsworld
01-25-2009, 11:11 AM
i was running a 45 pilot and 175 main so then i went to a 48 and 180 no difference so i am going to make sure that the valves are not tight

scottsworld
01-26-2009, 07:55 PM
well i figured it out it was my hot start stuck open

BancheeFew
01-27-2009, 02:44 PM
yea look at the valves that i think would be the problem ajust them. Or you could be shifting wrong?

scottsworld
01-28-2009, 03:09 PM
shifting what, it does it when sitting in nuetral