PDA

View Full Version : ProFabAtv?



trx400ex
12-20-2002, 06:56 PM
Does anyone have any engine work doen by Pro Fab Atv? I was looking on there site and saw a 400ex engine kit for $1200. It came with piston, gaskets,cam,porting,valve seals, oversized valves, modified carb airbox lid and headers, bore and hone cylinder, and i think thats about it. Just wanted to see if anyone had any feedback on them. Thanks

trx400ex
12-20-2002, 07:01 PM
oh, and it came with heavy duty cam chain and springs

ny300exrider
12-20-2002, 07:09 PM
from what ive heard they do some good work...alot of 300ex's have pro fab kits and i read there great. i know this is for a 400 but its probly the same quality

Foxrage
12-20-2002, 08:21 PM
I went up there not to long ago to talk to them. They are really nice people with good prices. Never had any motor work done by them but if i do ill have them do it.

0240099r1
12-20-2002, 09:31 PM
with all you listed sounds like a killer price and i have never heard anything bad about those guys just good things.

chavez
12-20-2002, 10:07 PM
scott (profab) has been doing my motors for years and havent had problems out of the ordinary give him a call tell him chavez sent you

Dienamo111
12-22-2002, 06:12 PM
To answer the question on Profab, yes I have had some work done by scott and yes he and his associates are great at what they do. Also they are very affordable, plus they are some great people to deal with. To visit his shop on the web is Profabatv.com. So as a customer of the shop I highly recommend his services!!!!! later:grr

Sparks425Ex
12-22-2002, 06:30 PM
Where is Pro Fab?

They made a trick 450F that really hauled so they gotta be doing somthign right.

Dienamo111
12-23-2002, 02:56 PM
pro fab atv is located as follows 721 S. Columbus Street Lancaster, Ohio 43130
740-654-0734 ATV - Source for High Performance Engine Builds for ATV's - Honda

honda250xrider
10-20-2003, 08:06 PM
scott is an awesome person to do business with. He will answer all your ?'s and will help you pick out the right kit for your fourwheeler. He has afforable prices and will get my business from now on!

Diedrich
10-20-2003, 09:00 PM
yeah i had one of their 330 motors..it was fast..could beat piped 400's..very awesome race engine..also nice people to deal with and have real good prices

turnandburn
10-20-2003, 09:43 PM
i had scott do the machine work on my 250x big bore to a 300 fully ported,cam hd valve springs. And it hauls the mail. I have 14/36 gearing and a+4 swing arm and it will still pull up if it gets traction. I have a 2 place finish out of my first two races. Scott is very helpfull and recomend him highly. he will be building my 416 next.:macho

F-16Guy
10-20-2003, 09:56 PM
No problems here, my bike runs strong. Quality of work and customer service were both great.

sampleez
10-21-2003, 09:33 AM
what all did your's have done to it Diedrich, cause my old 300 (stock bore and stroke) that i built would beat my buddy's piped 400

Out_Sider
10-21-2003, 06:49 PM
theres no way a 300 with stock bore and stroke could beat a piped 400!! no way in hell or anywhere. BTW Scott is my hero!! he answered all my question when i was ordering my 330 kit, great person.

Diedrich
10-21-2003, 09:11 PM
it had the 330 kit in it..webcam..3-angle valve job..harden rockers..titanium valves..it would run man..i bought the motor off a guy on ebay for $550

YZROOSTINYA
10-22-2003, 05:09 AM
check the sig

Scott is a cool feller

slosh13
10-22-2003, 07:35 AM
Scott at PROFABATV is the man. He goes put of his way to help anybody with anything. Hes an awesome guy to deal with and his prices are real affordable. I would recommend him to anyone. :)

426exMx
10-22-2003, 10:55 AM
scott built my 426 w/ hot cam stage 2, polished and ported head, mx valve grind, bigger valves, 12:1 piston, ive got an hmf muffler and head pipe, and fcr 39mm carb and it flat flies. scott is the man:D

slosh13
10-22-2003, 01:11 PM
if you dont mind me asking , how much did that setup cost you?

426exMx
10-23-2003, 11:30 AM
the motor work was about $1100-1200 not includeing shipping, the hmf settup and carb were around $500 each. put a 36 tooth rear sprocket on and its like putting gravy on your taters. for more proof scotts the man, when i got my motor back from the ups the bottom of the container was badly cracked and broken like someone picked it up threw it down three or four times, i took out the motor and the oil drain on the bottom of the motor was broke off, so i called scott and told him what happened, he said to send it back to him and hed check it out and make sure it got fixed whether the ups honored it or hed fixed it himself. i delivered it myself the ups isnt touching it anymore. three or four weeks later the ups still hadnt decided if they were going to honor the insurance,(they said it wasnt packaged right even though scott does all his motors the same way and this hasnt happened before) so scott had an extra motor case half laying around that it needed and fixed it himself even though it wasnt his fault, he said he'll take it up with the ups later. even more proof the ups sucks a big one, when i shipped the motor to scott i packaged it even better than he said to and when it arrived at the shop the ups guy handed scott the motor with shipping stickers over the intake and exhuast ports, no packing. scott checked over the motor and said it was ok. so the ups isnt on my christmas card list anymore.