~~Race Ready 300ex Wanted~~

[90cc DAD]

I am Looking for a Race Ready 300ex for my son.
If you have one...could you please post pics and a price?
Or E-Mail me the info at... TimYo69@msn.com

[woodsracer22]

http://www.exriders.com/vbb/showthread.php?s=&threadid=373335 Make me an offer.

[90cc DAD]

that is what i am looking for... But you are really far away!!

[hondaquadrider]

Here is a link to my 300. I also sent you an e mail

http://www.exriders.com/vbb/showthread.php?s=&threadid=379580

[d kelley]

just reposted our 300 under 300ex forum

[honda250xrider]

just a little info for ya take it for what its worth.
do not get fully adjustable shocks on the 300 you will lose travel about an inch or so and this is to much to lose when the 300 is limited to begin with.

setup's that i have tried include axis shocks, works, elka, tcs. out of those the works performed the best, i had to send out the elka twice because of blown seals and just horrible valving. this was for the standard travel a-arm setup. I can't explain any reason why the works performed better but they absolutely without a doubt performed better than the others. the others always seemed way to stiff even after being sent out to get revalved. i simply just blame it on the lack of travel that the shocks have and therefor most try to compensate for setting the shocks fairly stiff, a little to much for my liking

i have tried lonestar, burgard, laeger suspension components, i liked the laeger the best. I have rode a couple conversions with a linkage system on the 300 and i felt that it was an advantage.

I would recommend looking for a 300 that has LT a-arms that were made for the 300, i have seen and rode some of the 400ex setups they are nice but i have found the true lt a-arms with lt shocks preform very well and you will have a noticable advantage in setup and design.

[shift675]

hey man give me a call if any questions


Up for sale 2005 300ex brand new frame and motor

New handlebars
IMS foot pegs
Nerf bars
Lonestar lt +2 400ex aarms
not shown in picture but i have the front beadlocks for the set of four douglas beadlocks.
lonestar stem anti vibe
elka shocks lt piggy back in the front. triple rate adjustable
new seat cover
new clutches
sprocket gaurd
lonestar swing arm
teather kill
Extra rear shocks.
dual front brake lines.
new exhaust super trapp tc.
different rev box.
different starter button
400ex carb and air box
front shock mount to allow 400ex shocks
after market bigger tank if wanted .
adjustable lonestar axle
fullbore plastic. it has different graphics on it then in the pictures.
bumper
grab bar.
lonestar rear wheel hubs
powermadd hand guards
lonestar anti lock fade lock nut/ disk hub
lonestar bar clamp
asv clutch lever

its gotta go asap

theres probably more i just cant think of anything else

if you have any questions you can post on here or call 317-534-8667 - Mike Johnson



call me for price man its a heck of a deal cause my dads wanting to get me a practice bike for next season so he wants it gone asap. 317-534-8667 if he dont answer call me 317-385-1878

http://i196.photobucket.com/albums/aa305/austingbleu/P1010153.jpg

[dodgepower]

300 ex (http://gulfcoastmx.com/mxforum/index.php?topic=2472.0)