Lets see your light set-up!

[CorvetteZ06]

hey, going to be puttin lights on my XC 250R, not sure if I'm gonna go with a stock 88-89 setup, or something aftermarket. Post up your set-ups! Thanx.

[86 Quad R]

i dont have pics but i run a oem 88-89 hood with light and a 86 setup on the stearing stem.

[LONG-ROD]

I run trail tech, no probs yet, could be brighter.

[wilkin250r]

^^^My setup is almost identical, except my lights are a little tighter in toward the center.

I'm thinking about using a 200W stator, and adding a second set of lights at my handlebars and using the low-beam setting for one set, and the high-beam setting will turn both sets on.

[Kirt13]

Trail Tech mounted through the plastics. Instead of using bolts to fasten the plastics to the front, I just use the bolt that's attached to the lights. It fits perfect through the plastics and frame. I put a lock nut on the under side of the plastics. It works perfect, like it was made for it. Also have the 200w stator and a toggle switch located right under the right side of the front plastics, attached to the frame. This way I can switch the lights on or off as I need.

[D Bergstrom]

Here is mine. Old pic of the quad, but still have the same lights. Can not say I ever need more light!

Doug

[D Bergstrom]

Pic of the same lights on my 450R. (Better picture.)

Doug

[LONG-ROD]

Ya I am running the factory light swith, I like the idea of 2 sets.

[danhung11]

Originally posted by wilkin250r
^^^My setup is almost identical, except my lights are a little tighter in toward the center.

I'm thinking about using a 200W stator, and adding a second set of lights at my handlebars and using the low-beam setting for one set, and the high-beam setting will turn both sets on.

Are those trail techs brighter than the OEM 88/89 Headlight/Hood Setup?

[wilkin250r]

Originally posted by danhung11
Are those trail techs brighter than the OEM 88/89 Headlight/Hood Setup?

I'm not sure.

I never had the stock lights, I bought it with no lights at all. I put two trail-tech 50W lights (100W total), and that combo was certainly brighter than stock.

But that stator got trashed with my other engine. Since I've gone to two 35W lights, but I haven't been riding with any other 250Rs to compare.

[derby]

I run the trail tech hid scmr16 in a flood and a spot. Super bright and will blind anyone coming in the opposite direction. Does not even compare to stock. I run them off of 2 small portible batteries (included in light kit) that clip on to my camelback. The run for about 4 hours. They will mount to your helmet or to the bars. I also use them for mountain biking and they have been very reliable. They cost about $600 for the set with everything included.

[dunatic]

trail tech HID's


http://img.villagephotos.com/p/2006-6/1193082/twinsoutside017.JPG


Trail tech halogen


http://img.villagephotos.com/p/2006-6/1193082/Img_0115-sml.jpg

[woodsracer144]

Originally posted by D Bergstrom
Pic of the same lights on my 450R. (Better picture.)

Doug

dude that is just got bad *** wrote all over it@ what are the knobs on the top of the lites for and how much are they?

[regg187]

ricky stator light bar and 1 pencil beam PIAA and 1 Driving light PIAA

http://i4.photobucket.com/albums/y144/regg187/DSC00609.jpg

http://i4.photobucket.com/albums/y144/regg187/DSC00592.jpg

I bought longer bolts recently to raise the lights up in the light bar, they are 1 3/4 inches higher now and it made a good improvment