exhaust hangers

[lucas70374]

looking for the brakcet that bolts the chamber up to the motor or frame. Right after the slip on from the header to the chamber. I have a sparks mx exhaust also

[mcboomport]

I'm not sure what mounts the sparks pipe needs, If your pipe can not use stock pipe mounts, disregard this.

RIS Designs have billet OEM replacements.
The bad part is they come in a set of three, and you need only one. New Honda ones are pretty expensive, but if you need only one, it will be cheaper to go with Honda.

I do see them on Ebay every once in a while.

[danhung11]

You can get billet exhaust flanges from ESR. Is that what you are talking about?

I am not sure on CFM ones on eBay, they seem like they do not go with the contour of the exhaust casting...not for sure though. Can someone confirm this?

[leager-n-ky]

http://cgi.ebay.com/ebaymotors/1985-honda-250r-atc-exhaust-pipe-hanger-oem_W0QQcmdZViewItemQQ_trkparmsZ72Q3a570Q7c66Q3a2Q 7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a 1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem2 50359534631QQitemZ250359534631QQptZMotorsQ5fATVQ5f PartsQ5fAccessories THIS IS ON EBAY NOW, IF YOU TYPE IN "HONDA 250R HANGER" IT WILL BRING UP THIS ONE PLUS TWO MORE THAT ARE IN AN EBAY STORE.