graham300ex
01-15-2009, 08:02 PM
2006 trx300ex (black plastic) #03
Quad is in great shape and would make a great racer. It was bought new in 07. Never had any problems. It could be set up for studded, rubber, trail,ect...Anyway's the motor was put together last summer first with just wiseco 11:1 piston and a hotcam stage1. Then right before Ice racing I had the head ported. Mods:
Uni air filter
400ex carb w jets
ported head
new intake valves and valve guide seals
hotcam stage1
wiseco11:1 piston (std.)
White brothers header
White brothers e series muffler (has 12 discs and all the bolts thread right in just fine)
Ricks hot shot cdi
studded tires,razrs,or razr mx's (rears, front are stock)
moose parking brake block off plate
g force axle (has little spacers to adjust width, not bent or anything)
2001 raptor rear shock (has rezzie)
14th,13th,12th....38th,36th sprockets
billet 14tooth case saver
fabricated the reverse lever so it is hands free.
graydon nerf bars
50mm moose risers
1 1/8" applied bars with pro grips and turn down on left side-can be removed
400ex a arms
400ex works riple rate shocks (don't have rezzies but the shocks were just rebuilt, springs a lil rusty but they have covers)
Diamond J relocation bracket.
Tusk bumper
Cut fenders
I also have all the stock parts.
I'm sure there is more just can't remember everything haha. Message me if your interested. Thanks.
Quad is in great shape and would make a great racer. It was bought new in 07. Never had any problems. It could be set up for studded, rubber, trail,ect...Anyway's the motor was put together last summer first with just wiseco 11:1 piston and a hotcam stage1. Then right before Ice racing I had the head ported. Mods:
Uni air filter
400ex carb w jets
ported head
new intake valves and valve guide seals
hotcam stage1
wiseco11:1 piston (std.)
White brothers header
White brothers e series muffler (has 12 discs and all the bolts thread right in just fine)
Ricks hot shot cdi
studded tires,razrs,or razr mx's (rears, front are stock)
moose parking brake block off plate
g force axle (has little spacers to adjust width, not bent or anything)
2001 raptor rear shock (has rezzie)
14th,13th,12th....38th,36th sprockets
billet 14tooth case saver
fabricated the reverse lever so it is hands free.
graydon nerf bars
50mm moose risers
1 1/8" applied bars with pro grips and turn down on left side-can be removed
400ex a arms
400ex works riple rate shocks (don't have rezzies but the shocks were just rebuilt, springs a lil rusty but they have covers)
Diamond J relocation bracket.
Tusk bumper
Cut fenders
I also have all the stock parts.
I'm sure there is more just can't remember everything haha. Message me if your interested. Thanks.