Where to find a STD bore piston?

[Brauap]

Sorry I am making these threads again.. but I need to know where I can find a good STD sized piston, OEM, without going to the dealer.. because they'll want around 100 bucks for the piston and rings.. rip off! So who knows where I can find one thats cheap, and good quality?

[HondaRaceReady]

Find a dirty girl if you want an STD.

[Brauap]

Originally posted by HondaRaceReady
Find a dirty girl if you want an STD.

:eek2:hahaha:eek2:

[buck440]

20 bucks can give you the gift that keeps on giving, but a penicillin shot will help, sometimes. :p

[400ex07]

Did you even try searching??? I tried "400ex std bore" on ebay and found 14 matches.

[Brauap]

I did, but I want your guyes input. I am not sure which is a good brand, bad, over priced, a steal, ect. :ermm:

[dariusld]

Originally posted by Brauap
I am not sure which is a good brand

In your first post you said "OEM". ??????????

[Stroker81]

I have my stock piston that I took out to put 440 kit in. It has very low hours. Let me know if you are interested.

[f4istunna]

for stock stuff id say go service honda.

[leasureryan]

I have a used piston stock still in excellant shape, just slap a set of new rings in it and you would be good to go. pm m if intrested

[Brauap]

Originally posted by f4istunna
for stock stuff id say go service honda.

That's where I had looked.. :ermm:

Wiseco-
Namura-
Off Brand-

What are your thoughts on the above?

btw here is the off brand I was talking about: http://cgi.ebay.com/ebaymotors/Honda-TRX-400EX-1999-2007-Std-Bore-Piston-Kit-NEW_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2 Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3 a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem 170265495286QQitemZ170265495286QQptZMotorsQ5fATVQ5 fPartsQ5fAccessories

[400ex07]

you need the gaskets too right?? and is there anything wrong with whats in it now? because you could just change the rings

[brian76708]

whats wrong with your piston whats the point of putting a new one if your looking for stock just slap some new rings on. plus u probably should get it honed before to and it might even have to be bored out if the cylinder is to scratched.

[storms400ex]

Originally posted by Brauap
That's where I had looked.. :ermm:

Wiseco-
Namura-
Off Brand-

What are your thoughts on the above?

btw here is the off brand I was talking about: http://cgi.ebay.com/ebaymotors/Honda-TRX-400EX-1999-2007-Std-Bore-Piston-Kit-NEW_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2 Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3 a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem 170265495286QQitemZ170265495286QQptZMotorsQ5fATVQ5 fPartsQ5fAccessories

DAYDREAMER!!!!!!!!!!!!!!!

[Brauap]

Originally posted by storms400ex
DAYDREAMER!!!!!!!!!!!!!!!

HUH?

[storms400ex]

your talking about trading it off so why worry about what type of piston to get??? but first you say your going to build it. i think your just a young kid that likes to daydream!!!!!!!!! thats ok all kids are like that

[Brauap]

Originally posted by storms400ex
your talking about trading it off so why worry about what type of piston to get??? but first you say your going to build it. i think your just a young kid that likes to daydream!!!!!!!!! thats ok all kids are like that

its going to be the std bore.. I need a new piston because mine is slightly scratched on the sides so either than OEM I am trying to figure out what other brands there are that may be cheaper.

[storms400ex]

:rolleyes:

[brian76708]

Originally posted by Brauap
its going to be the std bore.. I need a new piston because mine is slightly scratched on the sides so either than OEM I am trying to figure out what other brands there are that may be cheaper.

if your pistons scratched then your cylinder is most likely scratched so it should probably get bored

[f4istunna]

if your just offing it soon after its built Namura piston kits are dirt cheap on ebay. I dont really recommend them though :rolleyes: Ive bought bikes that had them and ran good but im not sure how they last compared to other brands.

[Brauap]

Originally posted by brian76708
if your pistons scratched then your cylinder is most likely scratched so it should probably get bored

Its not, but I am just going to get it honed.

[cam19aro86]

If your cylinder isn't scratched get a hone for $20 and buy a Wiseco piston, they last a long time and are fairly cheap. I wouldn't mess with Namura, but I don't know much about them just what I have heard.

[storms400ex]

Originally posted by Brauap
its going to be the std bore.. I need a new piston because mine is slightly scratched on the sides so either than OEM I am trying to figure out what other brands there are that may be cheaper.

if your piston is scratched on the sides, then your cylinder needs a hone job!!!!!!!!!!!!!!!!! (dumb dumb)

[Brauap]

Originally posted by storms400ex
if your piston is scratched on the sides, then your cylinder needs a hone job!!!!!!!!!!!!!!!!! (dumb dumb)

No *hit sherlock!

[storms400ex]

how many more threads are you going to start??????????????

[Brauap]

Originally posted by storms400ex
how many more threads are you going to start??????????????

As many more as I need to.. whatcha going to do about it? Go ahead.. complain some more! :rolleyes: