Broken bracket

[tyman2395]

how can i fix this ?


http://i492.photobucket.com/albums/rr286/tyman2395/my%20400ex/100_1172.jpg

i know someone on here used it almost looked like metal but went on like a jb weld type of thing and fixed their plastics because that completely snapped off.

[tyman2395]

thanks man if anyone else has another idea tell me thanks

[97WarriorRider]

yeah it was braauup..I htink he might have used PC-7 not sure though..i used jb weld on my fenders and it worked though

[tyman2395]

ya i am gonna try that guys thanks

[lilyamaharacer4]

Plastic welder

[morrisbeer]

Mine broke in the same place. I used a small piece of aluminum on the under side and used some small pop rivets. Hasnt moved or gotten worse in 2 years.

[coryatver]

I had that problem I used zip ties. drill a hole in both sides and zip it. Its not pretty though.

[dunatic]

plastic welding (http://uk.youtube.com/watch?v=95GgGh8Rn0E)

[CJM]

Plastic welding is the best, you can buy the whole thing for about 100 bucks and it will do anything you want.

I had a bracket that was gone, it ripped off. I used the supplied mesh and melted it in then used the plastic over it, stronger than stock. I also repaired my headlight bracket area b/c it had no more brackets to screw into.

If you want the cheap fix anytype of real epoxy will work.