99 400ex partout, Lonestar,works,CHEAP

[nicker71]

Lonestar a-arms I think they are plus one. Measures out to about 46.5" wide with 3/2 rims. Need a couple of hiem joints on the upper arms. Ball joints are still pretty good, but one has a tear.
$175 shipped (SOLD)

Lonestar steering steem with lonestar 7/8 clamp. Just noticed it was bent when taking off bike
$50 shipped. Its on ebay NO RESERVE

Rear lonestar axle +2 +4 good condiontion.
$150 shipped

Lonestar swingarm Not sure but think its a +1.25" Nice condition
$150 (SOLD)

Rad axle carrrier tappered bearings are good.
$55 shipped (SOLD)

Sproket hub LSR $50 shipped (SOLD)

Nerf bars good shape one has a broken net. Not sure what brand
$50 shipped (SOLD)

full exhaust Not sure what brand. Sounds good. Not super loud.
a broken weld on the upper mount and the bottom is smashed from the caliper, but not cracked.
$make offer (SOLD)


Tripple rate front works shocks. good condtion, springs look very good Low time on these. Still have stickers. With rezs.
155lb-195lb.
260 shipped (SOLD)

Rethal bars with spider grips and pad, also kill switch
$30 shipped (SOLD)

Add 5% if using paypal.

THis is a whole bike, Runs great. PM me if your looking for something. I will see motor and frame, plastic later on.

I will work with package deal to save you money on shipping if you get multiple parts. Parts are still on quad.

pic are coming
thanks
nick

[nicker71]

http://i156.photobucket.com/albums/t27/nicker71/P1020542.jpg

http://i156.photobucket.com/albums/t27/nicker71/P1040579.jpg

http://i156.photobucket.com/albums/t27/nicker71/P1020540.jpg

http://i156.photobucket.com/albums/t27/nicker71/P1020543.jpg

http://i156.photobucket.com/albums/t27/nicker71/PC200421.jpg

http://i156.photobucket.com/albums/t27/nicker71/P1040580.jpg

[nicker71]

http://i156.photobucket.com/albums/t27/nicker71/P1040581.jpg

http://i156.photobucket.com/albums/t27/nicker71/PC200413.jpg

http://i156.photobucket.com/albums/t27/nicker71/P1040586.jpg

http://i156.photobucket.com/albums/t27/nicker71/PC200412.jpg

http://i156.photobucket.com/albums/t27/nicker71/PC200409.jpg

http://i156.photobucket.com/albums/t27/nicker71/PC200414.jpg

[nicker71]

http://i156.photobucket.com/albums/t27/nicker71/P1040588.jpg

http://i156.photobucket.com/albums/t27/nicker71/P1020544.jpg

http://i156.photobucket.com/albums/t27/nicker71/P1040585.jpg


http://i156.photobucket.com/albums/t27/nicker71/P1040584.jpg

[blankenship]

the pipe is a noleen HVO ther are not that bad for performace if you got on you tube u can see the video of one on a 440ex with a stage 2 hot cam as the video says

[nicker71]

http://i156.photobucket.com/albums/t27/nicker71/PC200416.jpg



http://i156.photobucket.com/albums/t27/nicker71/PC200417.jpg

http://i156.photobucket.com/albums/t27/nicker71/PC200421-1.jpg

http://i156.photobucket.com/albums/t27/nicker71/PC200429.jpg

[nicker71]

Originally posted by blankenship
the pipe is a noleen HVO ther are not that bad for performace if you got on you tube u can see the video of one on a 440ex with a stage 2 hot cam as the video says

OK Thanks!

[nicker71]

bump

[Nippleclips]

im interested in the a-arms

[nicker71]

Pm sent to nippleclips

[iownatoyota]

so do u got a ftont bumper for it?

[ae13291]

do u still have the chain?

[akrowdieEX]

im interested in the handlebars

[nicker71]

Bumper is sold, (waiting for payment)

yes I have the chain, Make an offer

I will get pics of the handlebars and chain tonight.

[exracer416]

is there any way you can verify the a-arms are +1?

[3400ben]

What shape is the rad axle carrier in? Will it fit a stock swingarm?

[nicker71]

Originally posted by exracer416
is there any way you can verify the a-arms are +1?

JUST SOLD THE A-ARMS

[exracer416]

ok what about the shocks and what length is the stem?

[nicker71]

still have shocks they are valved for 185lb MX. stem appers to be stock.

the bearing carrier is still in the swingarm, but looks good and rear end is tight.

[3400ben]

sent pm

[nicker71]

I got the rear end apart tonight, will have pics up tomarrow.

[nicker71]

Sorry about the delay on pics. I got a new camera and I dont know why but photobucket wont accept the file when I try to download off of camera. I'll figure something out.

Also have a great running motor. New top, bottom and tranny. White bros cam. LOW hours, Runs like New and I have some of the paperwork from the dealer that rebuilt the motor, to prove work done. NO smoke, I sold the exhaust already, but it would be possible to hear it run if you brought exhaust system.
If you could pick it up I will throw in the frame (motor is still in frame) carb wire harnes, oil cooler etc, so all you would have to do would be to put exhaust on it would start. All for $650. I'd just rather not bother with shipping.

[nicker71]

Sproket hub, splines good fits tight. Comes with sproket.
http://i156.photobucket.com/albums/t27/nicker71/DSCN0010.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0012.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0013-1.jpg

Axle in good shape splines and bearing surfaces good. Some little rust spots showing on axle (it sat outside for awhile) most clean off with steel wool. Perfectly stright.

http://i156.photobucket.com/albums/t27/nicker71/DSCN0015.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0016.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0017.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0018.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0019.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0021.jpg


I havent got pics of the bearing carrier yet, Its full of grease. But I torn one of the o rings on the one side taking it off. Its a large o-ring but nothing special, should be able to find one about anywhere bearings are sold. Bearings feel good. This is a tapered bearing carrier, that has a greese nipple on the side by the sproket.



Im going to work on taking the swing arm off, once I do I'll post new pics

[yfzfelix]

I would like to see a picture of the carrier, which white bros cam does it have and would you sell the cam by itself, e-mail to yfzfelix@yahoo.com

[nicker71]

not sure on what cam it is, I have the model number its, WB1870

Also have the specs on the cam, I dont want to part the motor out, but if for some reason I do then I'll let you know.

Pics coming on carrier and swingarm is just a bit. Loading off camera now.

[nicker71]

Swingarm is in good shape.
Bearing are tight.

http://i156.photobucket.com/albums/t27/nicker71/DSCN0037.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0038.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0039.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0040.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0041.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0042.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0043.jpg

[nicker71]

Bearing carrier

Good shape, its a H9 Rad tappered
just needs a new o-ring on one side.

http://i156.photobucket.com/albums/t27/nicker71/DSCN0045.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0044.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0046.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0047.jpg
http://i156.photobucket.com/albums/t27/nicker71/DSCN0048.jpg

[yfzfelix]

that white bros cam number is called by white bros the "all around cam" and they made a race/track cam #wb1498 thats the one I'm looking for

[wvspeedfreak]

Pm me your best price shipped on the swingarm.Also,can you measure the length from center of pivot bolt hole to center of carrier hole for me?Thanks.

[Brauap]

How much for the wiring harness w/ the on/off switches?

[wvspeedfreak]

Sent you another pm.I think I will take the swingarm.

[nicker71]

Originally posted by yfzfelix
that white bros cam number is called by white bros the "all around cam" and they made a race/track cam #wb1498 thats the one I'm looking for

Ok thanks, now I know what to tell people when they ask.

[wvspeedfreak]

Just sent you the money for the swingarm.Thanks.

[nicker71]

Originally posted by Brauap
How much for the wiring harness w/ the on/off switches?

$45 shipped

[Brauap]

Originally posted by nicker71
$45 shipped

Is there any damage to it? i.e. spit, sliced wires?

Also.. do you accept pay pal?

[nicker71]

Yeah Im sure there are some splices, it has a kill switch hooked up and a rev box.

[nicker71]

selling the axle, sproket hub, and stem on ebay
These are no reserve auctions

http://cgi.ebay.com/ebaymotors/Lonestar-extended-axle-2-4-400ex-250R_W0QQitemZ190281109183QQihZ009QQcategoryZ43974 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

http://cgi.ebay.com/ebaymotors/Lonestar-sproket-hub-400ex-250R-NO-RESERVE_W0QQitemZ190281112995QQihZ009QQcategoryZ43 974QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

http://cgi.ebay.com/ebaymotors/Lonestar-steering-stem-and-clamp-400ex-250R-NO-RESERVE_W0QQitemZ190281116965QQihZ009QQcategoryZ43 974QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Brauap]

Originally posted by nicker71
Yeah Im sure there are some splices, it has a kill switch hooked up and a rev box.

Do you have any pictures of the harness? Are you sure it works 100%?

[nicker71]

I will pull off the front plastic and send you some pics of the wiring harness. The quad ran good and there wasnt any issues before I started tearing it down. If I dont get the pics posted tonight then they will be up tomarrow.

[shaw25]

how much for the plastic? and do you have the rear brake rotor

[Brauap]

Originally posted by nicker71
I will pull off the front plastic and send you some pics of the wiring harness. The quad ran good and there wasnt any issues before I started tearing it down. If I dont get the pics posted tonight then they will be up tomarrow.

pichers yet?

[nicker71]

Give me about 1 hour and I'll have them up.

[nicker71]

Originally posted by Brauap
pichers yet?

http://i156.photobucket.com/albums/t27/nicker71/DSCN0092.jpg

This pic show 2 wires that have been taped off. It was like this when I got it not sure what they run to. Maybe lights??
http://i156.photobucket.com/albums/t27/nicker71/DSCN0093.jpg

http://i156.photobucket.com/albums/t27/nicker71/DSCN0094.jpg


This wire was installed to my kill switch
http://i156.photobucket.com/albums/t27/nicker71/DSCN0095.jpg

http://i156.photobucket.com/albums/t27/nicker71/DSCN0096.jpg

[shaw25]

would you send me a pic of the plastic

[nicker71]

Originally posted by shaw25
would you send me a pic of the plastic

i will get pics tonight

[Brauap]

You have a PM.

[nicker71]

Originally posted by Brauap
You have a PM.

Didnt get your PM

[Brauap]

:ermm: check it now :ermm:

Sorry.. somehow I sent it to myself, but I had your name in there set as the recepiant..:confused:

[Brauap]

Your inbox is full. ;)

[Brauap]

I reveived my harness yesterday and was about 95% accurate on the description.. this is an excellent seller! Real fast replies, super fast shipping (I bought it and then the next day he shipped it out!) and overall a real nice guy!! and I got it just 3 days after purchasing it.. very impressed! Will do bussiness again! A+!

[wvspeedfreak]

Nick,how did you send my swingarm....parcel post??

[nicker71]

Yep, did I give you tracking number?? My brother works for the post office so I have to support the USPS. plus I think its a little cheaper than ups

[Brauap]

I am needing more parts and I am hoping you have them!! I need the two circled parts in the following picture.. do you have them? If you do, how much are they shipped?

http://i197.photobucket.com/albums/aa283/braaup/2855_REAR20AXLE2020DRIVE20CHAIN.gif

Thanks!

[e450r]

can you send pics of the axle to soccer10evan@hotmail.com

[nicker71]

every part sold except the plastic.

[knelson]

Your box is full, pm me a cost shipped to 32408, and I'll prob take those plastics off your hands:D