New Lexx Slip on Pipe

[Turboderf]

Hey guys Iam looking for help i just put on a Lexx slip on pipe 06 450er with a hrc kit and was going to jet the carb. iam running a closed air box the jet that i have is 128 what is a good size to start at iam in florida which is sea level i ride woods thanks for the help

[dpizz450]

you need to take your airbox lid off for the hrc kit or it will not be running to its full potential. with that cam and exhaust you need more air flow. you will also notice a lot more power from taking the lid off. if your worried about getting wet, throw an outerwear air box lid on there.

i know you already have the hrc jet kit, but read this, what comes with this jet kit is the best recommended jetting all around for an hrc kit and exhaust.


HRC needle, clip, #55 Leak Jet, and 162 Main Jet

http://www.woodwardspecialties.com/shop/productdetail.htm?productId=-63569&catalogId=&searchProducts=hrc%20jet%20kit