Log in

View Full Version : Sparkplug


Baley69
12-17-2002, 04:51 PM
What do you use to get the damn plug out of a 400? I heard that you can buy a special tool to get at them, but couldnt find anything. And what brand of plug do most of you use?
bklyn400ex
12-17-2002, 06:23 PM
i use NGK, and the bike shoulda came with the tool, its easy to use, if it didnt go to any shop, they should have 1
Honda2003
12-17-2002, 07:43 PM
these are the tools my 250ex came with.
Baley69
12-17-2002, 09:02 PM
Thx guys.
SLB400EX
12-22-2002, 06:23 AM
NGK here too.
We use the Motion Pro Socket... it uses a ratchet, makes changing the plug a little easier.
12-22-2002, 06:54 PM
go to a honda dealer ship, ask to order the stock tool kit, works perfectly
Quadfather
12-22-2002, 07:11 PM
My plug wrench wouldn't even get near the plug. I had to grind the corners off of it to get it down in the hole to the plug.
JOEX
12-22-2002, 10:43 PM
My Crafstman 18mm 3/8 drive deep well socket with 4" extention works fine:confused: I almost bought one of those $20 "special" sockets...don't need to.

Joe
12-23-2002, 06:25 AM
..some people dont realize ..leaving the tool box off..
is not a good idea ..
PS, dont forget to index the plug ..