My new Acquisition 99ex

[nicker71]

just picked it up.

It has....
IMS shifter
lonestar swinger and a-arms I think the swinger is a +1.25 and the arms are +1. ( I think)
lonestar steering steem and clamp. good condition 7/8 bar
works triple rate front shocks like new condition
stick style steering dampener
Lonestar axle +2 +4
Rad tapered bearing carrier
Nerfs
Rethal bars
ASV clutch lever
DWT beadlocks all the way around 3-2 offset front and the backs are 8 in rims
Good Razr fronts 21-7-10 4ply
Good turf tamer rears 18 in
Newer blue race cut plastic with some burn holes near exhaust, no cracks

Subframe Looks to have a newer coat of paint. Good shape

The bad

Full Nolen exhaust but not in the best conditon, needs some welding on the mounting brackets still works good.

Front a-arms have a lot of play in them they need new heim joints and probably a ball joint or 2.
Frame has been welded on in several places.
Needs a seat cover

http://i156.photobucket.com/albums/t27/nicker71/PC200409.jpg
http://i156.photobucket.com/albums/t27/nicker71/PC200411.jpg
http://i156.photobucket.com/albums/t27/nicker71/PC200410.jpg
http://i156.photobucket.com/albums/t27/nicker71/PC200414.jpg
http://i156.photobucket.com/albums/t27/nicker71/PC200412.jpg
http://i156.photobucket.com/albums/t27/nicker71/PC200415.jpg
http://i156.photobucket.com/albums/t27/nicker71/PC200413.jpg
http://i156.photobucket.com/albums/t27/nicker71/PC200413.jpg
http://i156.photobucket.com/albums/t27/nicker71/PC200423.jpg
http://i156.photobucket.com/albums/t27/nicker71/PC200427.jpg
http://i156.photobucket.com/albums/t27/nicker71/PC200418.jpg


Im new the the 400ex's not sure if im going to keep it or not since I already have a YFZ, 125trx, and a 200x.
whats something like this worth??

[Brauap]

In that shape.. barly anything. No one will want to lift a fingure when buying.. possibly 2g.. your best to part er out.

[nicker71]

Yep thats what I figured, the frame looks rough and the plastic isn't all appealling neither. But the motor and all the other parts are in great condition. It had a new top bottom and tranny put in by the dealer not to long ago. It starts right up in the cold and its below freezing. Shifts really good and everything feels really tight. Clutch feels great. No smoke at all. Its a very solid motor. I beleive it has a cam and Im not sure about the bore. If I keep it then I will replace the frame and plastic. And upgrade the back shock.

[Quadforce]

looks like a nice project if you picked it up cheap enough

[brian76708]

id part it out and sell me the A arms :)

[Brauap]

I call first dibs on the drive chain!! :blah:

[Stoke88]

Looks like a decent ride. If you did plan on getting rid of it parting out would be your best bet. With the amount of aftermarket parts on there you could make alot more parting them. On the other hand if you wanted to keep it and put another $2000 or so into it and repowdercoat everything and get some new plastics you'd have a pretty sick quad. Your choice.

[nicker71]

Yeah, Some new plastic about $300. New podercoated frame and maybe matching beadlocks rings would look good. Total cost with all the other little stuff I would say about $1000.

I took the chain off to soak it in gear oil.

[buck440]

that pipe is so ugly :eek2:

[Yippie-Ki-Yay]

If you part it out, Contact me, im interested in the bars, with the clutch lever, The shocks, and the shift lever. If that other guy backs out on the lonestar stuf, i call second dibs! Give me a price if ya do! :p

[nicker71]

I'll sell outright for $1700. If i cant get that then I will part it out, or a least convert it back to stock. Anyone interested.

[nicker71]

$1600. I will post in for sale forum soon.