Quote please!!!

[KEVIN300A]

Hey pappy can I get a price quote on powdering these parts please.... Ready for my winter hybrid build!!

Shocker Yellow
400ex frame
Houser +3 arms
Subframe
Laegers Swinger
4 hubs
motor mounts
yz426 clutch cover, motor cover

Shiny black
nerfbars without heels
AC racing bumper
AC grabbar
brake calipers
handlebars
pep shock springs... rear and fronts

I think thats it maybe some small misc. brackets I just need a ballpark figure to get some money together... thanks Kevin

[Pappy]

Shocker Yellow
400ex frame $185
Houser +3 arms $50
Subframe(included in frame cost)
Laegers Swinger $50
4 hubs $20 each
motor mounts $20
yz426 clutch cover, motor cover $20 and $15

Shiny black
nerfbars without heels $45
AC racing bumper $25
AC grabbar $15
brake calipers $15 each
handlebars $15
pep shock springs... rear and fronts $45 for all if same color

The Shocker powder will probably be a bit higher then normal colors being it is from prismatic, but if its not to bad these prices should be good to go.

[KEVIN300A]

Do these prices include stripping and return shipping?? thanks for the quick response

[Pappy]

They include stripping and all prep work. return shipping will be around $55

[KEVIN300A]

I will be in touch thanks!!

[KEVIN300A]

updated:

Pappy sorry money is getting a little tight my new list is going to be...

shocker yellow
frame-subframe
Houser lower a-arms

can you give me a price with return shipping
I contacted prismatic and shocker yellow is $17 a pd

thanks kevin

[Pappy]

400ex frame $185
Houser +3 arms $50
Subframe(included in frame cost)

Return shipping $33

Let me know so i can contact them and find out if clear is required etc. Wont affect your price, but will help me get ready to do the work.

[KEVIN300A]

I am going to try and go the see the welder now to weld on a removable grab bar prior to powder... do you weld there or will I be better off doing it locally?? as soon as I figure that out I will be ready to ship your way.... its just the lower part of the a-arms not all four... thanks

[Pappy]

I can do it, prefer not to:p (the grab bar mod) It is alot easier to do when you have all the parts there etc(the rear fenders are a nice addition to have when doing this so you can see where to make the cut along with the exhaust). If you have a local guy you know then by all means have him do the work that way you can kind of have a hand in designing how the grab bar will mount, everyone has their own way of fab'ing it up. Just be sure to tell whoever does it to weld in a support BEFORE cutting the subframe or it will twist!

[KEVIN300A]

sounds good I will see if I can find someone locally to do it... hard to find someone good in this area... thanks

[Pappy]

Make sure to find and print out some pictures of this mod to show a welder...it will help him alot!

[KEVIN300A]

K I actually have a modded subframe... but the one I am making the hybrid is still solid so I have something for him to copy... thanks for the help and I will be in touch hopefully ship out by middle of next week.... sorry for all the questions but the frame was painted i started stripping to check for cracks in frame I see nothing one real small crack I will have my welder fix. but if you come across some small cracks what is your procedure?? obviously I know you don't powder over them... but do you fix them or return??

[Pappy]

No problem on questions, I prefer folks to ask all they can!

If I find cracks in any part im working on, I fix them at no charge.

[KEVIN300A]

thank you sir I will be in touch by middle of next week to ship out.... thanks

[KEVIN300A]

PAPPY how do you recommend shipping?? I got two price quotes one was $200 the other was $160 is there any way I can get it cheaper...???? thanks

[Pappy]

Not sure where your shipping from....but use fed ex


sub frame goes inside frame, zip tie them together. shrink wrap and ship.

small parts get boxed and shipped