cam help

[bosshogg1]

i have a question for any one that can help me out, i wanted to know can i use rm450f dirtbike cams in my ltr an if so wat is the difference between hot cams an dirtbike cams :(

[660LE]

you can use the cams but you have to swap the sprockets. not an easy task. so you should just my intake cam. haha crower high grind mx cam

[bosshogg1]

is the crower just like the hot cams, an when you said change the sprocket, would that be the front or back , what would i gain or lose from either one, I'm looking to do some changes while my repair guy has it opened up

[ltrracer]

he meant, u have to change the sprocket gear on the cam itself, u have to take the cam gear off the ltr and put it on the RM cams

[ltrracer]

Originally posted by 660LE
you can use the cams but you have to swap the sprockets. not an easy task. so you should just my intake cam. haha crower high grind mx cam i have a question for you, how do you like the crower cam? i was considering them but i have custom cut web's now. Sorry to jack the thread lol

[bosshogg1]

thanks man, if i was to make the switch what would be the gain, an would it be a big difference from the stock cams an how are your cams

[ltrracer]

yes going from stock cams to aftermarket cams will make a pretty noticeable gain in horse, my cams are great i absolutely love them, if you can afford web's then i would def buy them

[bosshogg1]

i seen this hotcam on one of the other websites a guy was selling a intake cam is it best just to get both cams or can i go ahead an get the one, My set up is airbox lid off ,trinity p commander, an a yoshi rs5 pipe which i need a new tip for i wanted to change my cams an front sprocket but i dont no wats the best set up for me

[ltrracer]

its very common on the LTR to buy only one cam, and i believe it is the intake, because the stock exhaust cam in the LTR is pretty good stock so yes you can go ahead and just get the one and would be fine

[bosshogg1]

thanks a million i hope it does the trick once i get the motor dialed in i can finally do the cosmetics to my baby :devious:

[ltrracer]

what kind of riding do you do?

[bosshogg1]

I'm into trail an pit riding an i was getting into jumping, hill climbing an i wouldnt mind one of those hair races or xc racing the last to are just me dreaming:D

[ltrracer]

cool, then if you get the one cam you should be happy, i advise getting a High compression piston also

[LTRracer4]

id stay away from the piston for the riding you do. Its not fun to go ride the trails and have to worry about finding race gas, and paying the high price. With the cams, and your set you have already you should do fine. if you're lookin for more after that look into some head work.

[bosshogg1]

thanks i think i'm going to go with that, now which ones do i get i'm really tight on money right now which ones are good an alil cheaper

[ltrracer]

the stage 2 hotcam is a popular one, its only 150 bucks too, my buddy just has that one in his race bike and is happy with it

[bosshogg1]

is that just the intake cam or both cams an if i go that route would i have to do any other changes to the bike

[LTRracer4]

its just the intake... the exhaust cam is a waste of money unless you.re trying to squeeze every single ounce of power out of your bike.

[bosshogg1]

thanks again, what store or site did your boy get the cam from

[LTRracer4]

probably right from hotcam.. im not sure, they are pretty common. Look in Motosport or Rocky mountain atv.

[bosshogg1]

oh ok thanks i have another question since I'm getting the hotcam intake, new timing chain,valves cleaned,an a new intake, with my trinity pc, can you run the cherry bomb with that, an should i change the sprocket with that to an a rev box

[LTRracer4]

is the trinity pc an actual power camander that you can plug into a lap top and reprogram? if so then you just need to load up a new map to accomadate your new stuff. if this is the case then you have to run the cherry bomb as well. If you have any instalation questions or if you havent ordered the cam yet call the number in my sig, Joe from Titan will help you out. Tell him Chris sent you. He can help with just about anything you've got on your bike, and he has the power commanders down pat. shoot him a call

[bosshogg1]

yeah thanks again i went behind my mech. back an had some one else put the pc on an they took the cb an didn't put it on a machine so I'm back to spending more money I'm going to give your guy a call within the next day or so

[LTRracer4]

alright cool, just tell him your situation and he will lead you in the right direction.