f4istunna
12-15-2008, 04:13 PM
--Fmf gnarly pipes and power coreII silencers - Good chrome, some minor bluing near cylinders and very minor surface rust that would clean up. Right pipe has a very small hole (size of tip of screwdriver) Easy repair (id take care of it if i had a welder handy). Silencers in very nice shape. Not sure what to ask on these so taking best offer
-- Pro design tether $10
-- Black Gripper seat good pan and latch no tears $35
--Pro armor nerfs straight no cracks, has wrong nets installed but work $35
-- DG Front bumper nice shape no cracks or bends good mounts $30
-- Black tank cover and grill w/ flame inserts nice shape good tabs $30
-- eyeball headlight covers new never used $10
--Rear shock w/ bushings and mounting bolts oem w/ yellow spring $40
-- Headlight buckets w/ bulb sockets (no lens or bulb) $5
--Front hubs w/ rotors rotors have some minor grooving, straight hubs could use new seals. $20
--Spindles $20
-- Oem a arms pc silver w/ dust caps good balljoints, may need bushings but i might have a new set to go w/. $85
-- Stock exhaust pipes and silencers $35
--Rear brakes caliper, lines and master w/ resi $30
--Front calipers with lines $30
--
-- Oem rear grab bar w/ tailight good no cracks or bends $15
-- Footwells/heelguards oem metal, black $5
--Front shocks yellow springs $25
--Reeds w/ cage and spacer plates carbon fiber (boyeson??) $45
--Cylinders 65mm bore good shape overall no gouges or scars some minor surface marks a hone/deglaze should take care of. Stock porting unmodded. $150
-- Mikuni 28mm carbs w/ throttle cable Good choke, tors eliminated work good $40
--Oem airbox w/ foam filter, lid and intake tubes nice shape $35
--Tie rods w/ ends good no tears $15
--Taillight w/ mounting bracket $5
--01 Wire harness minus coil and cdi $25
-- headlight/kill switch $15
--Rear shock linkages $5
-- OEM wheels $40 pair front or rear
--01 frame w/ title 2 small dents in front no cracks, straight no cracks w/ swingarm good threads $250
-- 97 frame fresh pc silver, w/ swingarm and linkage straight no cracks good threads $150
-- Complete 01 bottom end w/ sidecovers stock crank good, good trans $400 obo
-- Stock cylinder heads (3) $10 ea.
--Stock gas tank w/ petcock and cap $10
-- stock radiator w/ overflow and lines $10
Have lots of other stuff i need to go through and test/inspect stators, flywheels, another set of cylinders, cases, axles, etc etc. Had several banshees at one point in time so ive aquired alot of spares over the years. Need to make some room and recoup some xmas $$...
Located in NE ohio can pickup or i can ship (actual costs to your zipcode).
Prefer paypal but can accept money orders also.
If you dont see what you need listed feel free to ask have tons more parts.
Thanks
http://img388.imageshack.us/img388/6537/sunp0013cm4.th.jpg (http://img388.imageshack.us/my.php?image=sunp0013cm4.jpg)
http://img410.imageshack.us/img410/5339/sunp0015jf9.th.jpg (http://img410.imageshack.us/my.php?image=sunp0015jf9.jpg)
I have pics of most the stuff just need to get them resized
-- Pro design tether $10
-- Black Gripper seat good pan and latch no tears $35
--Pro armor nerfs straight no cracks, has wrong nets installed but work $35
-- DG Front bumper nice shape no cracks or bends good mounts $30
-- Black tank cover and grill w/ flame inserts nice shape good tabs $30
-- eyeball headlight covers new never used $10
--Rear shock w/ bushings and mounting bolts oem w/ yellow spring $40
-- Headlight buckets w/ bulb sockets (no lens or bulb) $5
--Front hubs w/ rotors rotors have some minor grooving, straight hubs could use new seals. $20
--Spindles $20
-- Oem a arms pc silver w/ dust caps good balljoints, may need bushings but i might have a new set to go w/. $85
-- Stock exhaust pipes and silencers $35
--Rear brakes caliper, lines and master w/ resi $30
--Front calipers with lines $30
--
-- Oem rear grab bar w/ tailight good no cracks or bends $15
-- Footwells/heelguards oem metal, black $5
--Front shocks yellow springs $25
--Reeds w/ cage and spacer plates carbon fiber (boyeson??) $45
--Cylinders 65mm bore good shape overall no gouges or scars some minor surface marks a hone/deglaze should take care of. Stock porting unmodded. $150
-- Mikuni 28mm carbs w/ throttle cable Good choke, tors eliminated work good $40
--Oem airbox w/ foam filter, lid and intake tubes nice shape $35
--Tie rods w/ ends good no tears $15
--Taillight w/ mounting bracket $5
--01 Wire harness minus coil and cdi $25
-- headlight/kill switch $15
--Rear shock linkages $5
-- OEM wheels $40 pair front or rear
--01 frame w/ title 2 small dents in front no cracks, straight no cracks w/ swingarm good threads $250
-- 97 frame fresh pc silver, w/ swingarm and linkage straight no cracks good threads $150
-- Complete 01 bottom end w/ sidecovers stock crank good, good trans $400 obo
-- Stock cylinder heads (3) $10 ea.
--Stock gas tank w/ petcock and cap $10
-- stock radiator w/ overflow and lines $10
Have lots of other stuff i need to go through and test/inspect stators, flywheels, another set of cylinders, cases, axles, etc etc. Had several banshees at one point in time so ive aquired alot of spares over the years. Need to make some room and recoup some xmas $$...
Located in NE ohio can pickup or i can ship (actual costs to your zipcode).
Prefer paypal but can accept money orders also.
If you dont see what you need listed feel free to ask have tons more parts.
Thanks
http://img388.imageshack.us/img388/6537/sunp0013cm4.th.jpg (http://img388.imageshack.us/my.php?image=sunp0013cm4.jpg)
http://img410.imageshack.us/img410/5339/sunp0015jf9.th.jpg (http://img410.imageshack.us/my.php?image=sunp0015jf9.jpg)
I have pics of most the stuff just need to get them resized