View Full Version : Parts Super Assortment..axle's/swinger's/tires/stock Take Off's..look..any Offers?
PUREBREED450R
12-09-2008, 02:59 PM
***********NO REASONABLE OFFER REFUSED*************
I WILL WORK DEALS ON SHIPPING FOR EACH PERSON & ITEM
PRICES DO NOT INCLUDE SHIPPING(shp will be very reasnoable)
*************STOCK 400EX TAKE OFF'S*****************
2 STOCK SKID PLATES- MOUNT UP STRIAGHT BUT HAVE THERE SMALL DINGS DEFF, MISSING MOST PAINT ON BOTTOM BECAUSE IT RUBBBED OFF, BUT STILL DO THE TRICK. ONE HAS A SMALL HOLE IN IT NEAR WHERE DISC RIDES. $6 EACH
STOCK BUMPER- NO DEEP SCRATCHES HAS ALL PAINT, NO DENTS BOLTS UP AND MOUNTS STRAIGHT, NO BOLTS INCLUDED. $10
STOCK AIR TUBES- ALL OFF 400EX'S NOT WORN? LOL GOOD CONDITION FOR AN INTAKE TUBE $5 EACH
1 STOCK PARKING BRAKE ASSEMBLY AND CABLE BOTH IN MINT CONDITION, HAVE JUST BEEN SITTING, NO RUST ON BLOCK OFF PART. $7 EACH
STOCK TOOL BOX- HAS LID, NO TOOLS INCLUDED NO DENTS SCRATCHES, LID STAY ON THE THING GOOD BOX TO THROW ON FOR A DAY TRIP WITH A COUPLE MUST HAVE'S $5
2 STOCK BATTERY BOX BRACES/MOUNTS/COVER ONE RED ONE BLACK BOTH HAVE WIRE THINGY STILL ATTACHED $6
2 STOCK CHAIN GAURDS BOTH GOOD SHAPE ALL WELDS TOGETHER, ONE GRAY ONE BLACK, WILL THROW IN CASE SAVER WITH WHOEVER BUY'S FIRST ONE. $ 5
2 SETS OF STOCK FOOT PEGS (ONE SHOWN) ONE HAS FILED TEETH ONE HAS REG SHAPED TEETH. GOOD SHAPE MISSING SOME PAINT NOT BENT, NO BOLTS INCLUDED. $ 15
300EX SHIFTER SIDE MOTOR COVER WITH STATOR/MAGNETO OR WHATEVER ITS CALLED. BLACK PAINT IS IN GREAT SHAPE INCLUDES WIRE. $15
STOCK EXHAUST HAS BAFFLE/S.A ON IT HAS CLAMP NO DENTS OR BENDS NO WELDS, CLEAN STOCK PIPE. $ 10
ITP 8" REAR'S ON CHEN SHANG STUDDED ICE TIRES- 5 HOLE CAME RIGHT OFF A LT250 80'S STYLE WILL SELL RIMS AND TIRES OR SEPERATE. RIMS POLISHED VERY NICE, BOTH HOLD AIR AND ARE STRAIGHT. $50 W/ TIRES $40 W/ OUT TIRES.
PUREBREED450R
12-09-2008, 03:00 PM
COME ON GUYS!!
PUREBREED450R
12-09-2008, 03:01 PM
THANX
Exrider434
12-09-2008, 04:58 PM
how much for the stock ex swinger?
PUREBREED450R
12-10-2008, 10:00 AM
BOTH ARE GREAT CONDITION AND DONT HAVE SKETCHY HISTORY'S. $85 FOR EITHER ONE.
THANX AND GET BACK TO ME PLEASE
SHAWN B
IMSROLL450R
12-10-2008, 01:18 PM
Is the lonestar for sure straight? If so I want it.
stuntin andy
12-10-2008, 01:29 PM
any xc tires?
PUREBREED450R
12-10-2008, 02:41 PM
THE AXLE IS STRAIGHT. NO SPACERS, AND THE HUB IS SHOT, MABEY YOU COULD MACHINE IT BUT I WOULDNT USE IT AGAIN.
WHERE THE CARRIER RIDES... IN THE MIDDLE OF THE AXLE, THERE ARE SOME SCRAPES, LOOKS LIKE A CARRIER BIT THE BULLET AND LEFT MARKS ON THE AXLE, BUT THEY ARE COMPLETLY COVERED BY A CARRIER ONCE ONE IS ON THE AXLE IT SELF. HOWEVER THIS DOES NOT EFFECT HOW THE AXLE SPINS. ALL AND ALL ITS A GREAT AXLE, JUST NEEDS A LITTLE MONEY SPENT ON IT. (HUB, SPACERS, CASTLE NUTS) LET ME KNOW, CAN SHIP WHENEVER YOU LIKE.
THANX
SHAWN
PUREBREED450R
12-10-2008, 02:44 PM
HEY PAL, NO XC TIRES FOR SALE, HAVE THE SET OF SHUR TRAK THAT YOU PROB SAW, I HAVE SOME OTHER TIRES ILL HAVE TO SEE WHAT I WANT TO SELL AND GET BACK TO YOU. THOSE SHUR TRAK HAVE A AGRESSIVE PATTERN AND HAVE ALOT OF TREAD AND ID SELL EM CHEAP BUT THATS F.Y.I
THANK YOU FOR LOOKING
PUREBREED450R
12-10-2008, 02:55 PM
THE GUY ASKING ABOUT MY SWINGER'S I PM'ED YA.
THANX!
Stoke88
12-10-2008, 06:58 PM
Interested in the tool box and parking brake assembly. LMK via PM.
stuntin andy
12-10-2008, 09:52 PM
ya... ide have to see the pattern on them..... get a pict plz?
PUREBREED450R
12-11-2008, 10:46 AM
here is a pic for ya. 85-90% tread left, no plugs no holes, good shape and ready to ride. if you like em let me know....i wanted to atleast post a pic so you can see i actually have em and all. This was this morning and it was like 7 degrees outside, thats whay the bottom of the pic seems blurry and makes them seem a little "whiteish" but ill take a better pic tonite. and that little piece hanging from the inside sidewall is like a little dust bunny not a piece of rubber from the side wall. let me know if you get the idea. talk to you soon
thank you for your time.
shawn
PUREBREED450R
12-11-2008, 10:48 AM
HEY STOCK I PMED YA PAL.
THANK YOU
SHAWN
stuntin andy
12-11-2008, 12:37 PM
ate there backs too?? and do they come with rims?? kuzz my rims are bent to hell lmao
PUREBREED450R
12-11-2008, 01:32 PM
HEY THERE THANX FOR YOUR FOLLOW UP. AND I KNOW ALL ABOUT BENT RIMS LOL. ****TY RIDE HUH? =)
I HAVE 2 SETS OF STOCK FRONT RIMS FOR A 400EX. I COULD SELL RIMS AND THOSE TIRES, I JUST GOTTA FIND OUT THE BEST SET FOR YOU AND ILL GET PICS IF YOU LIKE TONITE. LET ME KNOW EITHER WAY. THESE TIRES I THINK ARE A GOOD SET OF TIRES AND STOCK RIMS ARE BETTER THAN BENTS ONES RIGHT? ILL GET SOME PICS AND THEN WE CAN GO FROM THERE. I HONESTLY WANTED TO KEEP MY FRONT RIMS ON THE STOCK WHEELS FOR AN EXTRA SET TO JUST FLY DOWN THE ROAD. BUT ILL KNOW THE WHOLE 9 TONITE
P.S ABOUT THE BACKS, MY BRO HAS STOCK RIMS PAINTED BALCK ON 55% TREAD FAST TREKERRS(SPELLING?) JUST THROWIN IT OUT THERE. L.M.K
KEEP IN TOUCH
stuntin andy
12-11-2008, 03:48 PM
hmm... ide like 2 see picts... ant thing is better than what i have lol..... ic ant ride on the road lmao
Stoke88
12-13-2008, 08:13 AM
PUREBREED450R your inbox is full. I've been trying to get back to you. LMK.
ceballos400
12-13-2008, 01:47 PM
im interested in front wheels for my 400ex... i see on your first post $50... let me know... need these asap, paypal ready
Atvman8351
12-14-2008, 01:54 PM
im interested in just the rear ice tires no wheels post a pic and let me kno how much shipped to ny
IMSROLL450R
12-14-2008, 08:40 PM
any news on the axle man? I still want it.
PUREBREED450R
12-15-2008, 07:22 AM
bump for my self guys, for all you following the thread, im sorry, this weekend my grandfather had a stroke and it put me away from a comp for 2 days!! sorry for the wait. dont worry everyone stuff got mailed out as planned, however i was beind on pm's and all!
imsroll dude thanx for staying with me, i have your axle and ill post pics in here within the hour
IMSROLL450R
12-15-2008, 07:50 AM
No problem man sorry to hear about your grandpa. Hope everything works out ok.
PUREBREED450R
12-15-2008, 10:09 AM
HEY IMS, THANK YOU VERY MUCH FOR THE KIND THOUGHT! I STILL HAVE THE AXLE FOR YOU, EVEN THOUGH COUSIN TRIED LOW BALLING ME ON IT LOL. I TOOK PICS FOR YOU.. LET ME KNOW PAL.
SHAWN
THIS FIRST PIC SHOWS THOSE SCRATCHES I WAS TELLING YOU ABAOUT ON IN MIDDLE PORTION, ALSO, LOK AT THE HUB, YOU CAN SEE WHERE THE SURFACE HAS BEEN WORN.
THE OTHER PIC IS TO SHOW THAT IT IS INDEED STILL STRAIGHT
HAVE A COUPLE MORE COMING
PUREBREED450R
12-15-2008, 10:14 AM
LONESTAR AXLE PICS
AXLE IS STRIGHT AND ALL SPLINES ARE ONE OF ITS BEST QUALITIES.
PUREBREED450R
12-15-2008, 10:16 AM
HERE IS ANOTHER
PUREBREED450R
12-15-2008, 10:17 AM
AXLE FROM THE OTHER END LOOKING IN
YOU CAN SEE ITS A GOOD LOOKING AXLE, BUT LIKE LOOK AT THE HUB, YOU CAN SEE THAT THE MOST INTELLIGENT WERE NOT THE ONES TAKING THIS OFF.
PUREBREED450R
12-15-2008, 11:37 AM
THIS CARRIER IS IN A ROLLING CHASSIS IN MY GARAGE, BUT YOU CAN TELL BY THE REAR END......THE CARRIER IS NOT A JUNKER.
THE OTHER CARRIER POSTED BELOW IS OUT OF MY 02 400EX, BEARINGS IN IT WERE REPLACED AND ONLY RODE ON FOR SAY 8 MONTHS.
THE AXLE POSTED, IF YOU LOOK...HAS A FEW LIGHT DINGS IN IT ON AXLE SURFACE AND THE SPROCKET HUB HAS A LITTLE TRIANGULAR PIECE MISSING? HOW? I HAVE NO IDEA? BUT THE AXLE STILL LOOKS GOOD, STRAIGHT, SPLINES ARE IN GREAT SHAPE. PM'ED YA LET ME KNOW OK?
THANK YOU FOR YOUR TIME!!!!
PUREBREED450R
12-15-2008, 11:43 AM
CARRIER IN THE ROLLER....
PUREBREED450R
12-15-2008, 11:44 AM
if you look in the pic above also, you can see when the carrier was tightened it was done correctly and not with a screwdriver, or allen key =)
the one below is the second carrier, little dirty sorry but ready to ride. this one has just been sitting.
PUREBREED450R
12-15-2008, 12:26 PM
another pic of the second carrier
PUREBREED450R
12-15-2008, 12:40 PM
stock axle pic, look on the hub it self youll see or you should see a triangular cut out looking piece. not sure how the hell it happened, but didnt effect the axle itself, or where the new sprocket hub would go.
PUREBREED450R
12-15-2008, 12:41 PM
axle and sprocket hub pic
PUREBREED450R
12-15-2008, 12:42 PM
axle splines are all in great shape.
PUREBREED450R
12-17-2008, 12:56 PM
BUMP
PUREBREED450R
12-19-2008, 02:15 PM
FAMILY ISSUES GUYS, EVERYTHING IS OK NOW.
PM'ED EVERYONE BACK.
PLEASE STICK WITH ME .......ANYONE ELSE MAKE ME A REASONABLE OFFER AND THE PART IS YOURS.!!!!!
PUREBREED450R
12-23-2008, 11:16 AM
bump
PUREBREED450R
12-24-2008, 10:52 AM
merry christmas let me make some one a deal...
tman12345
12-24-2008, 07:04 PM
I'm looking for Rims for a 400ex with 10 inch front rims and 9 inch rears, do you have these?
honda400exfast
12-26-2008, 04:19 PM
let me get some picks of the stock heel quards!!!
BlasterEaten250
01-12-2009, 04:17 PM
Any more pictures of the ice tires, especially close ups of the studds? What size are they, and do they hold air? Also do they fit a honda bolt pattern?
PUREBREED450R
01-13-2009, 11:18 AM
they will not fit a honda bolt patterm. they are off an 80's suzuki lt 230/250 5 lug rear pattern. ITP 8's rims sat outside for almost a year then i snagged em =)...jumped a fence and polished em up =). the tires are chen shang's. one holds air for 4 days or so. the other will hold air also, needs 6 ice screws then will hold air, i imagine only will hold air as good as the other one, but id sell them cheap just dont have any need for them.
had an idea but never did it,, bolt plate to existing holes, then drill holes honda bolt pattern. just a thought any ways
$50 shipped.!.!.!
shawn
PUREBREED450R
01-13-2009, 11:19 AM
left rim
PUREBREED450R
01-13-2009, 11:22 AM
other side...studds next pic
PUREBREED450R
01-13-2009, 11:23 AM
try number 2
PUREBREED450R
01-13-2009, 11:47 AM
studds.......really not worn just deff visable rust.
powderider87
01-13-2009, 02:09 PM
Pm'ed ya.
PUREBREED450R
01-13-2009, 02:12 PM
got back to everyone.
BlasterEaten250
01-13-2009, 02:47 PM
Originally posted by PUREBREED450R
they will not fit a honda bolt patterm. they are off an 80's suzuki lt 230/250 5 lug rear pattern. ITP 8's rims sat outside for almost a year then i snagged em =)...jumped a fence and polished em up =). the tires are chen shang's. one holds air for 4 days or so. the other will hold air also, needs 6 ice screws then will hold air, i imagine only will hold air as good as the other one, but id sell them cheap just dont have any need for them.
had an idea but never did it,, bolt plate to existing holes, then drill holes honda bolt pattern. just a thought any ways
$50 shipped.!.!.!
shawn Will you seperate the tires from the rims?
PUREBREED450R
01-13-2009, 02:57 PM
IF YOUR SERIOUS, YES I WILL SEPERATE THEM FOR YOU. THESE RIMS NEED TO BE USED AGAIN!!!!
LET ME SEE HOW THESE THINGS COME OFF TONITE AND WE CAN GO FROM THERE? IF THAT SOUNDS OK LET ME KNOW.
THANK YOU FOR YOUR INTREST
BlasterEaten250
01-13-2009, 03:06 PM
I pm'd ya
BlasterEaten250
01-13-2009, 03:06 PM
I pm'd ya
RaceinCircles
01-18-2009, 02:27 AM
I'm also interested in the studded tires...I understand blaster's got first dibbs, but just in case. Also, Blaster...Are you near the Quad Cities at all?
PUREBREED450R
01-20-2009, 07:59 AM
50 shipped rims and tires
pm'ed everyone back
e450r
02-04-2009, 09:35 PM
is the axle for a 400ex? send pics of the axle to soccer10evan@hotmail.com is anything wrong with it?
PUREBREED450R
02-06-2009, 08:28 AM
anyone else
codyarthur13
01-25-2010, 02:41 PM
empty your inbox, and how much for 1 stock skid plate shipped to zip 15068?
Cbeasley
01-26-2010, 07:09 PM
Headpipe still available? If so how much shipped to 46221?
racerdad88
01-26-2010, 07:39 PM
What swingarms do you have? Are they all stock? Do you have a +1 1/4"?
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.