250R4EVR
12-08-2008, 10:20 PM
Heavly modded 250R
Motor #1
86 Base
jeremiah jones Pro-x 265 Cylinder w/o-ring head. New top end (0 hours)
Hotrod Crank (3 hours)
New oem Basket and inner hub (3 hours)
New oem Transmissin (3 Hours)
Barnette Clutch (3 hours)
Motor # 2
87 Base
Paul Turner National Kit 265 w/ Cool head. (3 hours on top end)
Hot rod crank (3 hours)
Yukno Tranny (3 Hours)
new oem basket, hub, and plate (3 hours)
Barnette clutch (3 hours)
36mm carb. Witch came with the paul turner national kit.
Paul Turner National pipe
Paul Turner Fatboy 2 w/sparky
LRD shorty silencer
Airbox eliminator kit w K&N
(comes with a few extra airboxes though)
All shocks are on a fresh rebuild with less than 5 hours of ride time
Elka Piggybacks Compound adjustable. Zero preload
Custom Axis Compound adjustable. Zero preload
Laeger- aarms +2+1
Laeger- swingarm -2
Laeger- stearing stem +2
duarblue eliminater +2+4
durablue antifade
Lonestar Carrier
Douglas beadlocks w/ mxrs's 95%
Sand Paddles. front and rear
AC grab Bar
AC Pro Pegs
Miaer Plactics
srp stearing stabalizer
chromemoly tierods
Protaper fatBars w/ clamps
prodesign killswitch
prodesign -1 powershifter
Powermads
The entire breaking system was bought new from honda in 2003 when the quad was assembled.
Ive got 4 or 5 boxes full of parts that will go with the quad.
Im sure im missing things. This is just off the top of my head.
If someones interested let me know. Recovering from an accident, have been out of the scene for a while. Just looking for something different. Over 15K invested
Make me an offer i promise you wont hurt my feelings
Possible Trade
mainly lookin for
kx 250/450f 05+
crf 450 06+
May concider something else.
f body - Z28
Motor #1
86 Base
jeremiah jones Pro-x 265 Cylinder w/o-ring head. New top end (0 hours)
Hotrod Crank (3 hours)
New oem Basket and inner hub (3 hours)
New oem Transmissin (3 Hours)
Barnette Clutch (3 hours)
Motor # 2
87 Base
Paul Turner National Kit 265 w/ Cool head. (3 hours on top end)
Hot rod crank (3 hours)
Yukno Tranny (3 Hours)
new oem basket, hub, and plate (3 hours)
Barnette clutch (3 hours)
36mm carb. Witch came with the paul turner national kit.
Paul Turner National pipe
Paul Turner Fatboy 2 w/sparky
LRD shorty silencer
Airbox eliminator kit w K&N
(comes with a few extra airboxes though)
All shocks are on a fresh rebuild with less than 5 hours of ride time
Elka Piggybacks Compound adjustable. Zero preload
Custom Axis Compound adjustable. Zero preload
Laeger- aarms +2+1
Laeger- swingarm -2
Laeger- stearing stem +2
duarblue eliminater +2+4
durablue antifade
Lonestar Carrier
Douglas beadlocks w/ mxrs's 95%
Sand Paddles. front and rear
AC grab Bar
AC Pro Pegs
Miaer Plactics
srp stearing stabalizer
chromemoly tierods
Protaper fatBars w/ clamps
prodesign killswitch
prodesign -1 powershifter
Powermads
The entire breaking system was bought new from honda in 2003 when the quad was assembled.
Ive got 4 or 5 boxes full of parts that will go with the quad.
Im sure im missing things. This is just off the top of my head.
If someones interested let me know. Recovering from an accident, have been out of the scene for a while. Just looking for something different. Over 15K invested
Make me an offer i promise you wont hurt my feelings
Possible Trade
mainly lookin for
kx 250/450f 05+
crf 450 06+
May concider something else.
f body - Z28