jkulysses
12-08-2008, 07:29 PM
It's got three dents towards ths front bend of the pipe that are from the bolts that tightened down the heatshield. It also has a couple dings or flat spots closer to were the actual cannister would slip on. None of them will change the fitment or performance of the pipe and I'll post pics below. I'll also throw in the unopened gasket I guess you'd call it that seals the headpipe to the cannister.
http://i202.photobucket.com/albums/aa299/jkulysses/100_2733.jpg
http://i202.photobucket.com/albums/aa299/jkulysses/100_2734.jpg
This one shows the three dents from the heatshield bolts.
http://i202.photobucket.com/albums/aa299/jkulysses/100_2735.jpg
These two show the dents or flat spots.
http://i202.photobucket.com/albums/aa299/jkulysses/100_2736.jpg
http://i202.photobucket.com/albums/aa299/jkulysses/100_2737.jpg
http://i202.photobucket.com/albums/aa299/jkulysses/100_2733.jpg
http://i202.photobucket.com/albums/aa299/jkulysses/100_2734.jpg
This one shows the three dents from the heatshield bolts.
http://i202.photobucket.com/albums/aa299/jkulysses/100_2735.jpg
These two show the dents or flat spots.
http://i202.photobucket.com/albums/aa299/jkulysses/100_2736.jpg
http://i202.photobucket.com/albums/aa299/jkulysses/100_2737.jpg