Part out

[Bruce300ex]

Well this entire summer i have been rebuilding my 300ex but now that summers over and i have no money i have decided to part the quad out. It never was completed.
I am willing to sell everything on the quad so if there is anything you need just send me a pm asking if i have it
I will try to get pics but they wont be of any quality because the camera isnt working right so every pic is blurry but i have good pics of the T-4 Slipon i have a brand new K&N plus Outwearers and The complete wiring harness and a few pics of the quad
The engine was just rebuilt recently and probably has under 10 hours on it and the valves were adjusted recently it also has an 11:1 piston in it
I also have a complete top end sitting in my basment including the piston but it needs some work but im pretty sure the head is fine
Also have +2 armadillo a-arms and front itp rims

[Bruce300ex]

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture032640x480.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture030640x480.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture026640x480.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture018.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture019.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture016.jpg

[dirtdawg]

how much for the k&n w/ outerwears shipped to 02832?

[Bruce300ex]

Since there both brand new 55$ shiped

[Bruce300ex]

I have a full cobra exhaust pretty much brand new less than 1 hour on it i payed 150$ for it
Ill sell it for 110$ shipped
you can see it in the pic of the quad

Also i sell the steering stem for 60$ shipped

The whole airbox including the tube that goes from the box to the carb and a uni filter for 45 shipped

G-force extended hubs which i pay 85 + shipping and havent been used yet they add 3.75 inches to the rear end
60 shipped

Rear break caliper and new rotor plus new pads 50 shipped

and im sorry about having no pic other than the ones already shown i should be able to get more but tuesday

[Bruce300ex]

nobody want any of this stuff i would really like to get some of this stuff sold before christmas

[stuntin andy]

im interested in alota things....

back brake caliper
plastics
wiring harness?!?(works good?!?)
if thats a 400ex shock ill buy that too
and it would be awsome if the sate could come with the plastics
and the back tires if they hold air...... let me know.....

my cell is 240 464 2029

andy

[Bruce300ex]

Originally posted by stuntin andy
im interested in alota things....

back brake caliper
plastics
wiring harness?!?(works good?!?)
if thats a 400ex shock ill buy that too
and it would be awsome if the sate could come with the plastics
and the back tires if they hold air...... let me know.....

my cell is 240 464 2029

andy

How much are you looking to spend on the harness i spent 200$ on it + shipping it works 100% perfect

You probably dont want the plastic because there not in good shape and arnt even for the 300ex i should have a pic by tomorrow

The brake caliper is in pretty good shape works perfect and has new pads do u also want the rotor?

I have already sold the rear rims/tire

and about wanting wheel spacers if ur looking for rear ones the g-force hubs i have are +3.75in brand new and are stronger and better made than the wheel spacer you buy of ebay and such

[Clay200X]

hey would you sell the engine???if so how much???(includin the carb. and head pipe)

[stuntin andy]

wow..... i was hopeing something cheaper than that.... hmm..... what about just the top half of the wiring harness... there is a place where it connects.... and how much for that and the back brake caliper... i don't need the rotor

[Bruce300ex]

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture009.jpg

Air box

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture010.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture013.jpg

Brake caliper

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture015.jpg

Gas tank

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture019.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture021.jpg

Plastics

[Bruce300ex]

Originally posted by stuntin andy
wow..... i was hopeing something cheaper than that.... hmm..... what about just the top half of the wiring harness... there is a place where it connects.... and how much for that and the back brake caliper... i don't need the rotor

Do you want the whole top half like including the start buttons the cdi and the spark plug wire?
And make me some offers

[Bruce300ex]

Originally posted by Clay200X
hey would you sell the engine???if so how much???(includin the carb. and head pipe)

I dont have the stock head pipe but would sell the complete cobra exhaust with it
Give me an offer
http://i470.photobucket.com/albums/rr65/bruce300ex/Picture035.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture036.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture037.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture039.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture038.jpg

[Bruce300ex]

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture023.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture024.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture025.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture026.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture027.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture028.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture029.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture030.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture032.jpg

[Clay200X]

Originally posted by Bruce300ex
I dont have the stock head pipe but would sell the complete cobra exhaust with it
Give me an offer
http://i470.photobucket.com/albums/rr65/bruce300ex/Picture035.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture036.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture037.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture039.jpg

http://i470.photobucket.com/albums/rr65/bruce300ex/Picture038.jpg

well would 301$ work??? :ermm:

[Bruce300ex]

Well im looking for a little bit more for the engine- it was just completely rebuilt and has under 10 hours on it- brand new 11:1 piston and rings new head and bottom end- everything is off a 2004 except the cylinder it was also ported and polished plus the carb is still in really good condition and the exhaust is brand new to

[stuntin andy]

just the start buttons....the connection is taped up in that pict... i do need the spark plug cover... can i get all for like 50 bucks?!?!?

[Bruce300ex]

Originally posted by stuntin andy
just the start buttons....the connection is taped up in that pict... i do need the spark plug cover... can i get all for like 50 bucks?!?!?

Ya i can do 50 for that pm me your address and zip code and all and ill figure out shipping you still want that rotor?

[Clay200X]

Originally posted by Bruce300ex
Well im looking for a little bit more for the engine- it was just completely rebuilt and has under 10 hours on it- brand new 11:1 piston and rings new head and bottom end- everything is off a 2004 except the cylinder it was also ported and polished plus the carb is still in really good condition and the exhaust is brand new to

thats what i was affraid of, how bout w/o the exhaust but still with the carb what would you be able to do me on that???

[Bruce300ex]

Originally posted by Clay200X
thats what i was affraid of, how bout w/o the exhaust but still with the carb what would you be able to do me on that???

Well my brother wont let me sel it for under 600 so around 600 lol

[Clay200X]

Originally posted by Bruce300ex
Well my brother wont let me sel it for under 600 so around 600 lol

the engine looks real clean and nice, well i cain't pay that much for a engine so thanks.

[Bruce300ex]

Directed to stunting andy because his inbox is full

No i was think 50 for the electrical and at least 75 for the caliper cause on ebay their going for at least 100

[stuntin andy]

lol i was wondering why i haven't heard form u in a few days lol..... i cant do that until after x mas....can you hold it for me? ill erase my inbox

[Bruce300ex]

Originally posted by Bruce300ex
Directed to stunting andy because his inbox is full

No i was think 50 for the electrical and at least 75 for the caliper cause on ebay their going for at least 100

Ya no problem

[stuntin andy]

sweet ill keepp in touch

[stuntin andy]

u wanna lower the price on the caliper 2 match this guy?

Nerfs have been sold. $40 on the rear caliper, includes new pads and shipping.

[stuntin andy]

http://www.exriders.com/vbb/showthread.php?s=&threadid=374381

thats for the quote above

[Bruce300ex]

ya im pretty sure i could do 30+ w/e for shipping

[stuntin andy]

sswweeettt... ill have the $ for it Christmas day =p

[Dave16]

How much for just the bottom end?

[stuntin andy]

just sayin like 4 or 5 more days till i got the money bro =p

[stuntin andy]

ok dude i got the $ alll i need is your info..... wiring harness and brake capiler ppllzzz

[87250xman]

How much for the front plastic?

[stevenroberts]

shipped to 27530

[250xsupertrapp]

how much for that extra head?

[stevenroberts]

how much for the front plastic shipped to N.C 27530

[Bruce300ex]

I would sell the fronts for 30$ + whatever it would be for shipping

also pms sent to a few people

[stevenroberts]

sorry i just noticed it wsa 400ex plastics

[250xsupertrapp]

u wnna get rid of that head, im in need of one