06Hotrods crank std.bore???

[kersey527]

Has anyone installed a hot rods std. bore crank for a 06 450r?

If so, is the small end of the rod where the piston pin goes susposed to have the oil holes on it? Just asking cause i recieved mine and it doesent have the oil holes! Wanna make sure this is right. Any info is appericated.

[kersey527]

I guess no one has inst. a hot rod crank in an 06r?

[st8jacket]

from what I have read,quite a few engine builders will not install a HR crank without the costomer having it trued and ballanced..this could be the reason no one has a reply..People SHY AWAYfrom what they read on the net..

My best advice would be to call HR..

[rt20ps]

Originally posted by st8jacket
from what I have read,quite a few engine builders will not install a HR crank without the costomer having it trued and ballanced..this could be the reason no one has a reply..People SHY AWAYfrom what they read on the net..



Another reason to shy away from what you read on the net. Hot Rod cranks work fine for the price. I use them all the time. Shure there are better ones out there for 2-3 times the price.

I don't have an 06 TRX in stock, so I couldn't answer your question. I would also call Hot Rods to verify.