416 kit questions

[brian76708]

does this seem like a good price or would you suggest any where else to get a 416 kit at.

http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=&store=Main&catId=110&productId=pPK1039&leafCatId=11007&mmyId=500034

[dariusld]

Seems a little high. How bout Ebay?

[3or4HONDA]

its hard to find 416 kits on ebay...anyway i couldnt find very many.

just a ton of 440 kits. try taking that DK price to your dealer mine said he would beat the denny price.

[brian76708]

well i found this one too but i dont know if it comes with everything

http://www.partsforatvs.com/default.asp?p=681&c=549&cn=Power

[dariusld]

Originally posted by brian76708
i dont know if it comes with everything

http://www.partsforatvs.com/default.asp?p=681&c=549&cn=Power

Thats a good price for what you get, not the best, but close. Could you define "everything" and "416" so we know what you want. A "416" could mean just a piston or it could mean alot of things. I would get a cam also.

[Honda#4]

www.goldenwestcycle.com has a 416 kit that comes choice of stg 1 or 2 cam and choice of comp piston 11:1 or 12:1 if I remember right plus the gaskets come also, sells for around $300 I think.

[brian76708]

Originally posted by dariusld
Thats a good price for what you get, not the best, but close. Could you define "everything" and "416" so we know what you want. A "416" could mean just a piston or it could mean alot of things. I would get a cam also.

as in everything i mean gasket rings wrist pin basically everything that is in the first kit i think it might be more expensive to get them separately then whats in that kit but im not sure. But i am getting a stage 2 hotcam crf timeing chain and 450r carb. also i am going to grind my header weld down and repack my exhaust. Oh yeah and im going to check to see if everything is inspec in my head and im going to do valve seals for shure.

[brian76708]

Originally posted by Honda#4
www.goldenwestcycle.com has a 416 kit that comes choice of stg 1 or 2 cam and choice of comp piston 11:1 or 12:1 if I remember right plus the gaskets come also, sells for around $300 I think.

wow thanks i didnt see that before i posted my add i might have to buy it. I just dont know what cam to get though. im thinking stage 2 though.

also does any one have a Golden west promotion code i could use.!!!

[Honda#4]

I went with JE just to be different but theres no wrong piston to buy, Wiseco I think tends to be off on there comp numbers according to posts on here, but JE doesnt carry a 11:1 piston 10:8:1 is the actual comp then you need a xr gasket for true 11:1 comp.

I love my stg 2 cam, with my port work it makes a good amount of torque and power.

[brian76708]

Originally posted by Honda#4
I went with JE just to be different but theres no wrong piston to buy, Wiseco I think tends to be off on there comp numbers according to posts on here, but JE doesnt carry a 11:1 piston 10:8:1 is the actual comp then you need a xr gasket for true 11:1 comp.

I love my stg 2 cam, with my port work it makes a good amount of torque and power.

nice i want to do port work i just caint afford it right know maybe next winter but im looking forward to getting this 416 kit in. did you completely redo your head when you got the 416 kit

[hypersnyper6947]

the motor i have now is a 416 and dam its fast, i like it better than my 440 i had before. This was zrpilot's motor. You can read the mods to it in my sig. i have all the dyno sheets for it to it puts down 37hp .

[Honda#4]

Yea I had everything done, Colby did my motor work so i'd look into his pricing and such. My porting was around $175 if I remember and it was worth it.

Pic of the port work.

[Brauap]

Originally posted by dariusld
Seems a little high. How bout Ebay?

exactly what I was thinking... :ermm:

[brian76708]

Originally posted by Brauap
exactly what I was thinking... :ermm:

i dont use ebay.

[Brauap]

Why not? If you get jipped (using pay-pal) I can't remember but either pay-pal or eBay (pretty sure its eBay) will refund your money. Its pretty safe if you ask me! Thats all I use, that and this site. But you just have to be careful buying used stuff, I have only had one problem buying something used (out of about 150+) it was a kill switch that didn't work.. no biggie. Just e-mail them (the seller) and they will most likey make it right, if they don't, leave negitive feedback.. and always look at the feedback before you buy. If you don't use eBay, you are missing out and KILLER deals!

[brian76708]

i found the same kit that honda#4 posted and its only 14 bucks cheaper after shipping and it doesn't include a cam therefore the best deal i have found is the kit honda#4 posted. in less any one knows of a cheaper one please feel free to post.

[Brauap]

Originally posted by brian76708
i found the same kit that honda#4 posted and its only 14 bucks cheaper after shipping and it doesn't include a cam therefore the best deal i have found is the kit honda#4 posted.

I'm not talking just about this, I am talking about parts in general. There are sooo many good deals on there! I love eBay!

eBay is like a mix between Wal-Mart and a Thrift Store, ONLINE! :devil:

[brian76708]

you just compared ebay to wal-mart even more reason not to use it.

[Brauap]

Originally posted by brian76708
you just compared ebay to wal-mart even more reason not to use it.


... I'm just comparing prices...?

fine.. less people to try to have to out bid on something! :p

Just tryin to help ya' out!

[brian76708]

Originally posted by Brauap
... I'm just comparing prices...?

fine.. less people to try to have to out bid on something! :p

Just tryin to help ya' out!

i was just kidding but im not a big fan of it too many scams and i like getting stuff face to face it takes a lot more guts for someone to screw you over.

[ZJTurbo]

Are there any kits that come with a jug, and sleeve already pressed in it?

[dariusld]

Originally posted by ZJTurbo
Are there any kits that come with a jug, and sleeve already pressed in it?

If you want to start another topic, start your own thread:)

[ZJTurbo]

Originally posted by dariusld
If you want to start another topic, start your own thread:)

You are offically and idiot.

[Honda#4]

Are there any kits that come with a jug, and sleeve already pressed in it?

Not that I know of, but I thought along time ago White Brothers had a kit that came with a sleeve and pretty much everything even a full system I think if I remember it was around $850 or something like that. I think it was sold in the chaparral cataloge but dont quote me on that though.

[dariusld]

Originally posted by ZJTurbo
You are offically and idiot.

I'm the idiot:rolleyes: :rolleyes:

At least I know what we are talking about and know how to speak;)

[Honda#4]

COME ON! this is ridiculous enough with the fighting the guy wanted a simple answer, i've seen enough fighting threads these past weeks and it needs to stop.

[brian76708]

any who thanks honda#4 for the kit i will probably buy that one is that where you bought yours from ive never herd of that site before.

[Brauap]

Originally posted by Honda#4
COME ON! this is ridiculous enough with the fighting the guy wanted a simple answer, i've seen enough fighting threads these past weeks and it needs to stop.

Agreed!! :rolleyes:

[ZJTurbo]

This is what I was talking about? Just wondering why in this kit the whole jug comes with it? Is it becaus of the size of the 440? Thanks,

-Ben

http://cgi.ebay.com/ebaymotors/HONDA-TRX400EX-JE-440CC-BIG-BORE-CYLINDER-KIT-440-400EX_W0QQcmdZViewItemQQ_trkparmsZ66Q3a2Q7c65Q3a3Q 7c39Q3a1Q7c240Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQh ashZitem360113139901QQitemZ360113139901QQptZMotors Q5fATVQ5fPartsQ5fAccessories

[fauxamish]

I found this on eBay:
http://cgi.ebay.com/ebaymotors/Honda-400EX-99-08-416cc-Big-Bore-Kit_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2 Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3 a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem 300278017550QQitemZ300278017550QQptZMotorsQ5fATVQ5 fPartsQ5fAccessories

It's a 416cc, 11:1 piston with gasket kit (Namura) for $160 shipped

This is a HC Stage 2 for $130 shipped
http://cgi.ebay.com/ebaymotors/NEW-HONDA-TRX400EX-400EX-HOTCAMS-HOT-CAMS-STAGE-2-CAM_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2 Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3 a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem 360111716382QQitemZ360111716382QQptZMotorsQ5fATVQ5 fPartsQ5fAccessories

[brian76708]

Originally posted by fauxamish
I found this on eBay:
http://cgi.ebay.com/ebaymotors/Honda-400EX-99-08-416cc-Big-Bore-Kit_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2 Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3 a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem 300278017550QQitemZ300278017550QQptZMotorsQ5fATVQ5 fPartsQ5fAccessories

It's a 416cc, 11:1 piston with gasket kit (Namura) for $160 shipped

This is a HC Stage 2 for $130 shipped
http://cgi.ebay.com/ebaymotors/NEW-HONDA-TRX400EX-400EX-HOTCAMS-HOT-CAMS-STAGE-2-CAM_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2 Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3 a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem 360111716382QQitemZ360111716382QQptZMotorsQ5fATVQ5 fPartsQ5fAccessories

thanks maybe i will use ebay only thing is i dont have a account after shipping its around 30 bucks cheaper

i wish they had the kit that honda#4 mentioned on RMATV they got a great christmas deal buy $500 worth of stuff get 100 off it would be nice.

[Honda#4]

I bought my cam and gaskets from Magic Racing, the piston kit I got from Colby.

[brian76708]

im probably going to get it from that site hopefully there reliable.

[brian76708]

well i ordered the kit honda#4 posted thanks for the good site. just caint wait to start on it. im starting it next weekend and i hope to get it done in 3 week.

[Honda#4]

Good luck and keep us posted.

[brian76708]

Originally posted by Honda#4
Good luck and keep us posted.

ill make a new post when i start the build and your right i am going to end up spending more then i expected especially if i decide to to some P&P i am going to be in the 1000s woohoo moneypitt hhaahhaha

[Honda#4]

Give Colby, site sponser on here a PM on a port job, he did mind and im quite happy with his results, the price is very reasonable also.

[brian76708]

Originally posted by Honda#4
Give Colby, site sponser on here a PM on a port job, he did mind and im quite happy with his results, the price is very reasonable also.

already did :)

[Honda#4]

Ok, good luck on the build.