Log in

View Full Version : Engine timing.



motox92
12-05-2008, 04:41 PM
Yamaha warrior 350. New crank is in. Ready to be timed any body know which marks line up where? Any help with be greatful thanks!

CSR400EX
12-09-2008, 07:50 PM
first you must line up the "T" mark on the flywheel inside that small hole on top of the side cover, now there is a line on the cam sprocket, line it up with a mark that is on the head at the top of the hole for your cam cover. make sure you compensate for the slack in the cam chain by turning the sprocket clockwise until the slack is gone.

86 Quad R
12-10-2008, 12:44 PM
Originally posted by CSR400EX
first you must line up the "T" mark on the flywheel inside that small hole on top of the side cover, now there is a line on the cam sprocket, line it up with a mark that is on the head at the top of the hole for your cam cover.make sure you compensate for the slack in the cam chain by turning the sprocket clockwise until the slack is gone

x2 especially that part bolded