Bracket for number plate

[QuadJunkies]

My Daughter needs a bracket for the rear number plate to relocate and I was wondering if someone could tell me whats avail.??
I totally forgot we would need one in time for a race this wk end so we will have to figured it out for the day.
Thanks

[mcwilly]

Not sure exactly what you're looking for, but Gary has one that mounts to the rear grab bar.....
link (http://yhst-17379619078614.stores.yahoo.net/renuplho.html)

[QuadJunkies]

Im needing one for the Suzuki, but maybe this one will work too??

[LTandRaptorider]

Tina, I think you mistakenly posted your ? in the LT250R forum. The one for the LT-R450 is different to go around the exhaust. I got mine off ebay, can't remember now what brand. And you have to remove the rear light when putting the number bracket on... Although if you wanna leave the light on, I believe someone makes a diff type braket for doing that. Anywho... Check on ebay, lots of bracket/ number plate combos on there. And of course check seller feedback rating before ordering. ;)

[QuadJunkies]

OMG... I am def a BLONDE... :o :p
I was def. short of sleep this entire week, it guess it shows huh? lol

It should now be where it was intended !
Thanks Darlin ;)

We did take of the light, no real need for it anyways.:)

[mat1977]

HEP has one.

[LTRracer4]

i took a broken bracket off an AC grab bar, few cuts, some drilling and i was able to bolt it up right behind where the tail light used to be.

[LTandRaptorider]

Originally posted by QuadJunkies
OMG... I am def a BLONDE... :o :p
I was def. short of sleep this entire week, it guess it shows huh? lol

It should now be where it was intended !
Thanks Darlin ;)

We did take of the light, no real need for it anyways.:)

No prob! And someone else posted HEP having one. That jogged my 2 brain cells and reminded me that is the one I got for my 450. Just make sure to tighten and use lock-tite on the bolts holding the number plate on. I forgot, and lost the plate on my first ride! Other than that, which was my fault, very happy with that brand plate holder.

btw... aren't you proud that I didn't make any blond jokes?! :D :blah: take care hun

[QuadJunkies]

Originally posted by LTandRaptorider


btw... aren't you proud that I didn't make any blond jokes?! :D :blah: take care hun

haha! I was surprised actually ..:p

Ill go check that out-thanks guys! Im not familiar with HEP....Can someone PM me a link to there site please? Thanks.

A freind of mine suggested trying an L bracket as well.

[mat1977]

PM'd you

[miller821]

I use the HEP also, and for 34.99 it's not a bad price.:)

[QuadJunkies]

In all honesty.. after looking at it on the site, I really dont like the look of that one.
anything else out there avail.?

[05Z400rdr]

The one that I use is something I actually made out of a sheet of aluminum and bolted on to the stock grab bar. Sorry to say, this is the only half decent picture of it that I have. :ermm:


Landon

[LTRracer4]

that looks exactily like the one i made.

[QuadJunkies]

Is there a reason why the brackets are so WIDE?? I think thats what I dont like about the looks on everything I have seen so far.

[LTRracer4]

wide as in the peices that go down?

It has to be wide for strength, if it were any skinnier it would be weak and flimsy.

[QuadJunkies]

IF they are made with something thick and the design was abit more narrow they would be fine ...something like an L bracket design I guess. The ones Ive looked at are really wide looking.
I dunno, I just dont like what Ive seen so far.They just look funny to me .lol
I seen one on Ebay that wasnt too bad.

[miller821]

I guess the wideness is just to make sure it clears the pipe... If you know someone good with metal i'm sure you could easily have one made for cheap and the way you want it.

[grantmi]

Suzuki makes a plate holder that bolts onto the stock grab bar...

http://www.suzukicycles.com/Accessories/detail.aspx?modelId=93b15df7-7887-44b8-983f-8f6cab6e2402&accessoryCategoryId=&accessoryId=a1655a9a-bdff-43c4-b573-f818d4e0c199


But....I went with the Rath unit....and am happy with it......

[xtreme 250x]

This is probably late but I went to the hardware store picked up some 1/4 inch by 1 inch aluminum and bent two pieces straight down. Looks and works good

[exrider49]

have you looked into rath yet?? i am very happy with mine.. i can get a pic for you if you would like to see

[QuadJunkies]

Id love to see a pic of both-thanks!
Its not too late yet, I havent got anything
We just made due and mounted like this for the GP race. lol

http://www.pbase.com/image/106789106/original.jpg

[xtreme 250x]

this was my first try with sheet metal it held up for a couple of races. I will try and get a new pic this weekend of the one I have on it right know.

[exrider49]

crappy cell phone pics but i think you can get the idea..sorry for the quad being dirty havent had time or decent weather to get it washed from the indoor..also the grab bar comes with the number plate

http://i194.photobucket.com/albums/z50/nickels18/1209081858a.jpg

http://i194.photobucket.com/albums/z50/nickels18/1209081857a.jpg

http://i194.photobucket.com/albums/z50/nickels18/1209081857.jpg

http://i194.photobucket.com/albums/z50/nickels18/1209081854.jpg