f4istunna
12-04-2008, 02:01 PM
Parts are all in useable condition removed from good running quad.
Accept paypal or Money orders. Ship within 24 hours of payment or next bus. day on weekend/holidays
All prices are plus shipping to your zip unless stated.
If nearby you can pick up. Near I80 and ohio/pa border.
Plastics and frame are local pickup only sorry.
--AC Polished nerfs, Black nets straight good shape, with bolts and spacers for engine mount you need small bolts for the pegs. Sticker rubbed off and some nicks/scratches on bottom nothing major. $40
-- FMF Powercore IV silencer with clamp and spacers, needs spark arrestor if you want one and cpl screws rattled out but i should have some that fit ill put in. $40
--Lonestar Axle w/ sprocket hub, locknuts, castle nuts and spacers. I think its a -2 or +1 xc axle w/ spacers, its 37 1/2" end to end. Good shape straight good splines and threads. Billet sprocket hub a little sloppy out of quad but tightens up good when snug the locknut. $65
--Maier Black racecut plastics w. duncan graphics and black duncan gripper seat w/ latch. One small crack near exhaust on right rear (less than 1 inch) holes for hood (not included) $150
--99 Frame. Straight no cracks or bends, good threads bill of sale $125
--Pro Design tether/kill switch $15 some scuffs on housing, works good.
--CDI quad ran good, good spark shindengen comes w/ rubber mount $10
--Rear wheel hubs good splines, has bolts in place of studs they work good tighten up fine. $20
-- Chain and sprockets 38t rear, 15t front , Oring chain. Good shape lots of use left $15
--Stock Footpegs, little worn but still decent grip $5
--Complete Engine mount kit . Brackets bolts and spacers $10
--Complete Front Brakes Calipers, Master w/ short(cut) lever, and lines. Need screws for cap and will need brake pads. $30
--Clutch lever/perch w/ cable. Outter coating worn in a spot still works $5
--Shifter straight, good splines $2
-- Gas tank heat sheild $pay shipping
--rear subframe rubber grommets (2) $2
-- battery box w/ strap $5
--Rear brake stay/ caliper bracket w/ bushing and snap ring $10
-- Starter works good $20
--Rear shock links (stock) $5
-- Left spindle $10
-- 1 front hub w/ rotor $10
--Airbox w/ lid, and both intake tubes $20
--Gas tank w/ petcock valve and cap $15
--Subframe straight no cracks could use recoated $20
--stock Metal swingarm skid $5
-- coil $5
-- Clutch lever/perch and cable $10
-- Steering stem clamp and bushing $5
-- front sprocket guard/cover $5
-- oem header w/ heatshield $10
-- footpegs $5
--yellow tank cover and black sidepanels $10
--Thumb throttle $20
-- Tusk 7/8 handlebars nice shape w/ pad $10
-- gas tank w/ cap and petock $15
Accept paypal or Money orders. Ship within 24 hours of payment or next bus. day on weekend/holidays
All prices are plus shipping to your zip unless stated.
If nearby you can pick up. Near I80 and ohio/pa border.
Plastics and frame are local pickup only sorry.
--AC Polished nerfs, Black nets straight good shape, with bolts and spacers for engine mount you need small bolts for the pegs. Sticker rubbed off and some nicks/scratches on bottom nothing major. $40
-- FMF Powercore IV silencer with clamp and spacers, needs spark arrestor if you want one and cpl screws rattled out but i should have some that fit ill put in. $40
--Lonestar Axle w/ sprocket hub, locknuts, castle nuts and spacers. I think its a -2 or +1 xc axle w/ spacers, its 37 1/2" end to end. Good shape straight good splines and threads. Billet sprocket hub a little sloppy out of quad but tightens up good when snug the locknut. $65
--Maier Black racecut plastics w. duncan graphics and black duncan gripper seat w/ latch. One small crack near exhaust on right rear (less than 1 inch) holes for hood (not included) $150
--99 Frame. Straight no cracks or bends, good threads bill of sale $125
--Pro Design tether/kill switch $15 some scuffs on housing, works good.
--CDI quad ran good, good spark shindengen comes w/ rubber mount $10
--Rear wheel hubs good splines, has bolts in place of studs they work good tighten up fine. $20
-- Chain and sprockets 38t rear, 15t front , Oring chain. Good shape lots of use left $15
--Stock Footpegs, little worn but still decent grip $5
--Complete Engine mount kit . Brackets bolts and spacers $10
--Complete Front Brakes Calipers, Master w/ short(cut) lever, and lines. Need screws for cap and will need brake pads. $30
--Clutch lever/perch w/ cable. Outter coating worn in a spot still works $5
--Shifter straight, good splines $2
-- Gas tank heat sheild $pay shipping
--rear subframe rubber grommets (2) $2
-- battery box w/ strap $5
--Rear brake stay/ caliper bracket w/ bushing and snap ring $10
-- Starter works good $20
--Rear shock links (stock) $5
-- Left spindle $10
-- 1 front hub w/ rotor $10
--Airbox w/ lid, and both intake tubes $20
--Gas tank w/ petcock valve and cap $15
--Subframe straight no cracks could use recoated $20
--stock Metal swingarm skid $5
-- coil $5
-- Clutch lever/perch and cable $10
-- Steering stem clamp and bushing $5
-- front sprocket guard/cover $5
-- oem header w/ heatshield $10
-- footpegs $5
--yellow tank cover and black sidepanels $10
--Thumb throttle $20
-- Tusk 7/8 handlebars nice shape w/ pad $10
-- gas tank w/ cap and petock $15