Swing arms

[fastford]

I am doing a turbo kit on a 660 and a 700 and am looking for a complete longer swing arm for both of them. Anyone know a company that sells kits?

[tater_kamik]

complete swingarm setups or turbo setups?

[fastford]

Sorry looking for a swing arm for both machines. Doing the turbos myself.

[tater_kamik]

so your looking for a complete rear setup? swinger, axle, carrier, shack, everything? i know albaaction.com has some setups with elka shocks and the swingers take banshee skids if i remember right. of course remember our sponsors but im trying to remember right off the top of my head who offers it all in one. although, for what you are looking for depending on length you may have to piece it together which is quite easy. chain, chain roller, bearings/seals (mainly all taken care of by the bearing carrier which the axle sits into) shock, linkage if ya want to change it at all (bearings/seals), swingarm, caliper mounting plate and spacers, etc. quite easy honestly just not sure what length you are looking for etc

[fastford]

I will check them out. My customer is looking for 12 inches longer on his 660 and 8 inches longer on the 700.

[tater_kamik]

did a little research, thats some long swingarms your customer wants. but this is what i was able to find fairly easily
http://www.traxatv.com/shopcart/swingarm-yamaha-raptor-p-455.html
http://www.traxatv.com/shopcart/eyeball-swingarm-yamaha-raptor-p-406.html
http://www.amstarmanufacturing.com/Swingarms.html


for a chain i would recommend http://www.sidewindersprockets.com/
there are a lot of axle companies out there as well as shock manufacturers. you will definately need long brake lines etc.

[fastford]

Thank you so much. Been out of town working for the last couple weeks and kinda have them on the back burner.

[xrdrsux]

best deal you will find is from Lance @ SLC swingarms.. go to ebay and look. He has a number and is a sponsor on other forums but i can remember his number