View Full Version : Cutting Plastics?
IRONFLIGHT2
11-20-2008, 08:22 AM
DOES ANYONE HAVE ANY IDEA ON WHAT THE BEST TOOLS ARE TO USE FOR CUTTING MY PLASTICS ON MY LTR. I AM TIRED OF THE DUSTIN WIMMER LOOK AND LOOKING TO GO WITH THE WINNEN CUT WICH IS A LITTLE HARDER TO CUT.
ohsobad_chevy
11-20-2008, 09:22 AM
Use a cut off wheel on an angle grinder.......cordless is much easier.
IRONFLIGHT2
11-20-2008, 10:42 AM
I USE THE SAME , JUST WONDERING IF THERE WAS ANY EASIER WAY FOR A CLEANER LOOK.
leasureryan
11-20-2008, 03:52 PM
alot of guys are using razor blades
ltrracer
11-20-2008, 05:42 PM
i used a cut off wheel on an angle grinder, then you take a very rough grit sand paper and go over the edges and get the big rough stuff off and smooth then once you do that go over it with a very fine grit sand paper and use that til it gets pretty smooth and that makes it look really good. im big on making stuff look good so i was in the same boat as you but if you do all those steps it looks like it came cut from the factory, good luck
robman
11-21-2008, 07:26 AM
i use pin striping then cut with a jig saw or hand saw with a fine blade.file off the burs and sand the remainder,works great
atvmaster0927
11-21-2008, 08:59 AM
Originally posted by robman
i use pin striping then cut with a jig saw or hand saw with a fine blade.file off the burs and sand the remainder,works great
Can you post some more pictures of your quad with cut fenders? I want to cut mine like that.
Thanks
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.