Cutting Plastics?

[IRONFLIGHT2]

DOES ANYONE HAVE ANY IDEA ON WHAT THE BEST TOOLS ARE TO USE FOR CUTTING MY PLASTICS ON MY LTR. I AM TIRED OF THE DUSTIN WIMMER LOOK AND LOOKING TO GO WITH THE WINNEN CUT WICH IS A LITTLE HARDER TO CUT.

[ohsobad_chevy]

Use a cut off wheel on an angle grinder.......cordless is much easier.

[IRONFLIGHT2]

I USE THE SAME , JUST WONDERING IF THERE WAS ANY EASIER WAY FOR A CLEANER LOOK.

[leasureryan]

alot of guys are using razor blades

[ltrracer]

i used a cut off wheel on an angle grinder, then you take a very rough grit sand paper and go over the edges and get the big rough stuff off and smooth then once you do that go over it with a very fine grit sand paper and use that til it gets pretty smooth and that makes it look really good. im big on making stuff look good so i was in the same boat as you but if you do all those steps it looks like it came cut from the factory, good luck

[robman]

i use pin striping then cut with a jig saw or hand saw with a fine blade.file off the burs and sand the remainder,works great

[atvmaster0927]

Originally posted by robman
i use pin striping then cut with a jig saw or hand saw with a fine blade.file off the burs and sand the remainder,works great

Can you post some more pictures of your quad with cut fenders? I want to cut mine like that.

Thanks