roudy4x4
11-15-2008, 11:16 PM
Today after riding all day I tore into my 93 300ex to clean the jets in the carb and adjust the valves.
I adjusted the valves, and cleaned out the carb, now it will start and idle decent. BUT
If I give it anything more than 1/8 throttle it bogs down and falls on its face sputtering and popping. I dont think its the valves because if I give it more throttle, and spray gas through the carb it will rev just fine. But then again Ive tore the carb down 3 times now to check and recheck and I cant find anything wrong.
Any Thoughts?
I adjusted the valves, and cleaned out the carb, now it will start and idle decent. BUT
If I give it anything more than 1/8 throttle it bogs down and falls on its face sputtering and popping. I dont think its the valves because if I give it more throttle, and spray gas through the carb it will rev just fine. But then again Ive tore the carb down 3 times now to check and recheck and I cant find anything wrong.
Any Thoughts?