PDA

View Full Version : wheel spacers



Z-King
12-13-2002, 03:27 PM
does any body know how to get the screws out of the hubs so i can put on my wheel spacers i have allready hit them with a hammer but they did not budge
do i have to get them pressed?

TC17
12-13-2002, 04:26 PM
i dunno. my dad was telling me how hard they were to get out. i'm getting some soon. there are ez-fit ones that i'm getting so i don't have to mess with that stuff.

Rip_Tear
12-13-2002, 04:42 PM
They are in there very tight, you might want to try getting a rubber hammer, or a peice of wood, so your don't ruin the thread on them.

Ryan
12-13-2002, 05:18 PM
I have them and I have toke them off a few times. If you still have the wheel on and just getting the wheel off the spacers then get a piece of wood and a hammer. Hit the hammer against the wood with the end of the wood by the rim. Hit it in a circle and it should come off slowly but it will work. I hope this didn't confuse you?:huh

AtvMxRider
12-13-2002, 05:23 PM
Just take the whell off, then put the nut back on just a few threads then knock the **** out of it with a hammer. they will eventually come out.

Z-King
12-13-2002, 07:16 PM
well i got them on we just hit the damn things with a sledge hammer