400cc
11-09-2008, 10:06 PM
Does anyone know what series main and pilot jets I need to get for my ex?
I think the pilot jet is a series 21 or 22, I read that somewhere, but can't remember
I'm also going with keihin jets.
I was going to rejet my carb after putting my pipe on and didn't want to order the wrong jets.
Does anyone know why my quad would start with the choke lever all the way up and the gas lever pushed in about half way, but when I turn the choke off and crank it, it doesn't even start or idle, the only way it will run is if you hold the gas in with the choke on and when you let the gas off it just dies. It's a pro circuit full exhaust by the way.
Oh and one other thing, this might be a dumb question, but isn't there supposed to be exhaust pipe o-rings installed? The reason I'm asking is because when I took the stock exhaust head pipes off there were no exhaust pipe o-rings installed at all, so does it really need the o-rings?
I think the pilot jet is a series 21 or 22, I read that somewhere, but can't remember
I'm also going with keihin jets.
I was going to rejet my carb after putting my pipe on and didn't want to order the wrong jets.
Does anyone know why my quad would start with the choke lever all the way up and the gas lever pushed in about half way, but when I turn the choke off and crank it, it doesn't even start or idle, the only way it will run is if you hold the gas in with the choke on and when you let the gas off it just dies. It's a pro circuit full exhaust by the way.
Oh and one other thing, this might be a dumb question, but isn't there supposed to be exhaust pipe o-rings installed? The reason I'm asking is because when I took the stock exhaust head pipes off there were no exhaust pipe o-rings installed at all, so does it really need the o-rings?