One of the nicest 250R's ever?

[250Renvy]

If I were to build one this is almost exactly how I would do it. Roll design anyway.


http://i4.ebayimg.com/02/i/001/19/a5/a718_3.JPG


http://i20.ebayimg.com/08/i/001/19/a5/acfc_3.JPG


http://i4.ebayimg.com/05/i/001/19/a5/b377_3.JPGhttp://i20.ebayimg.com/05/i/001/19/a5/b377_3.JPG

[redred55]

I was hoping you were going to post a pic of mine!!!

http://i87.photobucket.com/albums/k140/redred55/DSCN0210.jpg

[Master LTR450]

envy you know the owner of that lobo?

[bushwesl]

Envy, that is a nice R, no doubt about that...

Hey redred55, lets see some more pics!

[redred55]

Like an idiot, I didn't take half the pics I should of when I built this thing. It's only showing 7.1 hours on the meter!!! Already looks well used!!!

http://i87.photobucket.com/albums/k140/redred55/IMG_5141.jpg
http://i87.photobucket.com/albums/k140/redred55/IMG_5151_2.jpg
http://i87.photobucket.com/albums/k140/redred55/DSCN0211.jpg

[bushwesl]

What cylinder are you running??

[norcalduner]

Damn, talk about some all time classics. I'm starting to drool as I'm typing this lol. Now all we need is for someone to post up a full Walsh and I'd say we got the holy freakin' trinity of 250r'dom:devil:

[redred55]

Originally posted by bushwesl
What cylinder are you running??
CT 350pv

[skyhighatv]

heres my stock frame roll, axis.

[skyhighatv]

#2

[skyhighatv]

one more

[Master LTR450]

Originally posted by skyhighatv
one more

Post one more of a close up of your front end!!!

[250Renvy]

The owner of the one I posted is Wes Stone and it's one of Matt Smiley's old racers - restored.

I was posting because it's for sale at $15K, but I was seeing if others thought it was one of the nicest built 250R's out there.

I mean it's got just about everything the best as well as being very ROLL built.

The only things it's missing is Roll heel guards, Roll bumper and grab bar and it should probably have a Duncan motor rather than an LRD motor, but that's splitting hairs.

[Master LTR450]

Originally posted by 250Renvy
The owner of the one I posted is Wes Stone and it's one of Matt Smiley's old racers - restored.

I was posting because it's for sale at $15K, but I was seeing if others thought it was one of the nicest built 250R's out there.

I mean it's got just about everything the best as well as being very ROLL built.

The only things it's missing is Roll heel guards, Roll bumper and grab bar and it should probably have a Duncan motor rather than an LRD motor, but that's splitting hairs.

Ok Wes is a cool *** dude didnt realize that was his bike though. Just curious but what are you going to say about my quad in about a month when its done then???

[skyhighatv]

front end

[8686]

Originally posted by norcalduner
Damn, talk about some all time classics. I'm starting to drool as I'm typing this lol. Now all we need is for someone to post up a full Walsh and I'd say we got the holy freakin' trinity of 250r'dom:devil:

I'll have my full Walsh 250R next week so I'll put some pics of that and my full Roll Design Lobo up soon. Maybe I'll put some up of my brother's Laeger narrow Pro-Trax, too.

[Nac's22]

Originally posted by norcalduner
Damn, talk about some all time classics. I'm starting to drool as I'm typing this lol. Now all we need is for someone to post up a full Walsh and I'd say we got the holy freakin' trinity of 250r'dom:devil:

not mine but its the walsh you wanted to drool over lol

http://i225.photobucket.com/albums/dd70/quadracer250r/Walsh250r0161.jpg

http://i225.photobucket.com/albums/dd70/quadracer250r/Walsh250r0091.jpg

[leager-n-ky]

This is my 93 Laeger. Those other bikes are sweeeeeeeeeet.

[mineralgrey01gt]

Originally posted by TRR440EX
not mine but its the walsh you wanted to drool over lol

http://i225.photobucket.com/albums/dd70/quadracer250r/Walsh250r0161.jpg

http://i225.photobucket.com/albums/dd70/quadracer250r/Walsh250r0091.jpg

that one was for sale not too long ago. Im not gonna jump on another 250r but that is one i would buy in a heartbeat

[troybilt]

This thread is turning into the 250R elites!!!!!!! I'm not worthy... damn nice quads.

[Hughes#34]

any of you guys know where to get the complete Hinson clutch case like the one on that walsh?

[Master LTR450]

good luck getting a hinson but burgard still makes them and the cover plates are interchangable. Go post in the burgard section.

[Quad1045]

the first bike posted on this thread is for sale on ebay for 15k

[Hughes#34]

thanks Master LTR450..I ordered one from Burgard

[312R1]

Here's my 03 Laeger Pro-Trax

[312R1]

Front end:D

[312R1]

Right side

[312R1]

Last one the rearend

[brandonpeake]

Is the white one's wes' quad.
And we is a super nice guy

[Nac's22]

312R1- you always seem to make me want to spend money with that thing

[krt400ex]

wow wow wow. i wish i had a 250R

[havinnoj]

Some serious machines!! Keep it up fellas!

[badquad]

Here is mine, still a work in progress.

LRD Aluminum Attitude Frame
AXIS Houser long travel front/ Roll Design, No link Rear/ Axis Rear
Lonestar Steering stem, axle, axle nut
Tag Bars

Stock Bore/Stroker with spacer/ 38mm Air carb.

The rest will be replaced as we go, wheels, tires, plastic, pegs/ nerfs, exhaust.

[312R1]

Originally posted by TRR440EX
312R1- you always seem to make me want to spend money with that thing


LOL...I'll take some pic's this weekend during the day. These pic's don't do it justice.:devil:

[krt400ex]

Originally posted by badquad
Here is mine, still a work in progress.

LRD Aluminum Attitude Frame
AXIS Houser long travel front/ Roll Design, No link Rear/ Axis Rear
Lonestar Steering stem, axle, axle nut
Tag Bars

Stock Bore/Stroker with spacer/ 38mm Air carb.

The rest will be replaced as we go, wheels, tires, plastic, pegs/ nerfs, exhaust.


that thing is sexy. love the lrd frame

[Master LTR450]

Originally posted by badquad
Here is mine, still a work in progress.

LRD Aluminum Attitude Frame
AXIS Houser long travel front/ Roll Design, No link Rear/ Axis Rear
Lonestar Steering stem, axle, axle nut
Tag Bars

Stock Bore/Stroker with spacer/ 38mm Air carb.

The rest will be replaced as we go, wheels, tires, plastic, pegs/ nerfs, exhaust.

Why does the rear look like it is sitting so low? Also I hope you got all the hardware needed for the frame when you bought it!! Did you buy it new?

[Master LTR450]

Originally posted by 312R1
Right side

What kind of pipe is that a PT im taking it? Also is it new or rechromed?

[312R1]

Originally posted by Master LTR450
What kind of pipe is that a PT im taking it? Also is it new or rechromed?


PT..I bought it new.

[quad janern]

Originally posted by Master LTR450
Why does the rear look like it is sitting so low? Also I hope you got all the hardware needed for the frame when you bought it!! Did you buy it new?

i wondered about that too

[quad janern]

Originally posted by Master LTR450
Why does the rear look like it is sitting so low? Also I hope you got all the hardware needed for the frame when you bought it!! Did you buy it new?

i wondered about that too. it does look really low in the rear, but i does look really nice too :D

[badquad]

Thanks all. I bought the frame used, but new. The guy did not use it. I have most of all the hardware for it.

The rear is low, and I am still trying to figure it out. I need to measure my shock. I bought the shock and swinger together for the 88/89 frame. I also broke my 90 elbow that goes in the shock for the line and adjuster res.. Maybe from the oil and gas out of the shock? NOt sure yet..

I will be back working on the 250R during the christmas break, so I will have to measure that rear shock.

Any other suggestions on why the rear would be so low.

Thanks for the feedback.

[250Renvy]

Originally posted by badquad
Here is mine, still a work in progress.

LRD Aluminum Attitude Frame
AXIS Houser long travel front/ Roll Design, No link Rear/ Axis Rear


I'm guessing the reason it's sitting so low is because you have the wrong length rear shock.

If that were my frame, it would be hard to ride on it being that it's still new and almost a work of art. But if I did ride it and build it up I'd be making it as much aluminum as possible. Aluminum swingarm, kicker, pedal, shifter, baja rims and GNCC tires, front and rear grab bars, bars, front and rear hubs/spindles, you name it, if they made it aluminum for the 250R I'd have it. It'd be so light - maybe even an aluminum drag axle or at least hollow axle.

[Flynbryan19]

Originally posted by badquad


Any other suggestions on why the rear would be so low.

Thanks for the feedback.

Long travel swingarm and standard travel shock maybe....

[dunatic]

here is mine....not much 250r stuf still left on it. 520cc saber, LSR DC3, TCS ZPS, +4 ladder, Axis ZPS rear, JJ&A front wheels and aluminum axle, carbon hood, tank cover, tie rods and shrouds.


http://img.villagephotos.com/p/2006-6/1193082/IMG_1410.jpg


http://img.villagephotos.com/p/2006-6/1193082/IMG_1424.jpg


http://img.villagephotos.com/p/2006-6/1193082/twinsoutside011.JPG


http://img.villagephotos.com/p/2006-6/1193082/IMG_1659.jpg

[8686]

Master, post some pics of your Lobo in this thread.

[Master LTR450]

here ya go

[Master LTR450]

2

[Master LTR450]

3

[lucas70374]

here is my bike, only pics I have right now

[lucas70374]

2

[jrspawn]

Originally posted by TRR440EX
not mine but its the walsh you wanted to drool over lol

http://i225.photobucket.com/albums/dd70/quadracer250r/Walsh250r0161.jpg

http://i225.photobucket.com/albums/dd70/quadracer250r/Walsh250r0091.jpg

thanks for the compliment man! The pics dont do it justice at all either. Ive changed some stuff up on it since those pics too. It just sits in the shop lookin pretty lol. Its also still for sale!!!!!!!!

http://i75.photobucket.com/albums/i309/jrspawn/Walsh250r0051.jpg
http://i75.photobucket.com/albums/i309/jrspawn/Walsh250r0261.jpg


Thank you
Justin

[baldathoR]

I have been debating on rebuilding mine or selling it and this is not helping.......or is it. :D

If I keep it I am going black/white also.

Sooooo good.





Originally posted by skyhighatv
heres my stock frame roll, axis.

[jon370r]

Here is an old one of my aluminum LRD Attitude framed quad. I've had it for 4 years now and still love it.

[jon370r]

another side shot

[XXX -rider]

Originally posted by 250Renvy
The owner of the one I posted is Wes Stone and it's one of Matt Smiley's old racers - restored.

I was posting because it's for sale at $15K, but I was seeing if others thought it was one of the nicest built 250R's out there.

I mean it's got just about everything the best as well as being very ROLL built.

The only things it's missing is Roll heel guards, Roll bumper and grab bar and it should probably have a Duncan motor rather than an LRD motor, but that's splitting hairs.

among a few little other things ...its also missing the quick fill tank or lid ...& he did not run flex bars...

that's back when the GNCC's worth traveling to watch & race 'em;)