cnc billet rezzy clamps for PEP shocks

[fly400ex]

Set of polished Billet cnc cut rezzy clamps for PEP front shocks with 1 1/2" bodies and 2 1/4" rezzys. $48 plus shipping

[fly400ex]

one more pic

[fly400ex]

3

[erbilabuc]

how many sets do you have? did you make them?

[fly400ex]

I have a dozen for Works shocks and a dozen for PEP shocks. They are cad designed and CNC cut, and yes I made them.

[wvspeedfreak]

Do you have a set that fit the Works stadium series shocks?If so I would be interested.

[erbilabuc]

are you set on the price?

[fly400ex]

Yes I have a set that will fit works shocks with 1 1/2" bodies and 1.84" (about 1 7/8"). I had them on a set of works zps stadium shocks on my 400ex. Measure your rezzies to make sure they are about that size.

[fly400ex]

works shock with clamp

[pdxbigfoot]

I have a set with the 5/8ths shafts. Will they fit?? I have threads that go almost to the top of the shock body but there is some space. How do you recomend measuring the rezzies??
Thank you in advance
J

[fly400ex]

All works shock bodies I have seen have 1 1/2" bodies, however yours may have the threaded collar that goes over the body. The clamps are 1/2" thick, so all you need is a 1/2" space to fit them in. If you look at the pics both the Works and PEP are 1 1/2" diameter bodies where the rezzy clamps are. The best way to measure the bodies and rezzies is with calipers, another way would be if you had an 1 1/2" open end wrench and were to slide it over the body and check for clearance, rezzies could be measured with a tape. Feel free to post a pic of your shocks and I can probably tell by seeing what type of body and rezzy you have.

[pdxbigfoot]

I will be right back...
Here ya go....Thank you!!
http://i238.photobucket.com/albums/ff145/pdxbigfoot/partsforsale155-1.jpg
http://i238.photobucket.com/albums/ff145/pdxbigfoot/partsforsale154.jpg

[fly400ex]

Yep, they will work provided that you have at least a half inch between the threaded collar and the elbow fitting (where the hose is coming out of the shock body) If less than a half inch space then you can lower that collar a notch (release tension from the spring and then drop the circular clip a notch). It looks like you have at least half an inch room though. Also looks like you have very nice 250r!

Thanks

[pdxbigfoot]

Let me get some cash in the Paypal account (i have auctions ending) and i will PM you. Thanx for the compliment and keep your eyes open for a thread in the 250R section around mid December...Its going to be super hott and these will clean it up even more...thanx again.
JASON