burgard +2 +1 A-arm ball joints

[AZ_TRX_05]

Ok. So, I know there are posts out there, but I still dont have clear part numbers.

These are standard travel, +2 +1 front A-arms, and I'm looking for the part numbers for both upper and lower ball joints. My right sides have Ocap 4T8 stamped on it. The left sides have Ocap 7T9.

Tried calling Burgard, but he said they are specially made for the arms. :ermm:

[AZ_TRX_05]

so, I think I found that these are off of a 70's beetle. and they are tie rod ends. I will know for sure tonight if that's what works, and post the part number.

[Eastcoast08]

Leager ball joints will work....i had the same burgard a-arms on my 4ooex a long long time ago and they were famous for breaking ball joints. Houser ball joints will also work.

[AZ_TRX_05]

so, I got the part from Checker. It's a McQuay-Norris part. It's a tie rod end # is ES419R. . . $20 bucks.

[86 Quad R]

the tie end for a late 70's - early 80's ford courier and mazda truck and for a 91 up geo tracker will also work