PDA

View Full Version : Hub nut ?


ned02
10-24-2008, 04:16 PM
Is the hub net left or right thread? I cannot remove the darn thing.
tyman2395
10-24-2008, 05:00 PM
did you take the cotter pin out?
ned02
10-24-2008, 05:03 PM
yes,cotter pin is out.
tyman2395
10-24-2008, 05:04 PM
try puttting the socket on it and hitting it hard then it should loosing stuff up it is normal thread left=loose right=tight
mooseracerX
10-24-2008, 05:19 PM
Impact gun usually does the trick. ;)
ned02
10-24-2008, 06:17 PM
Don't have an impact gun but I do have a hammer.I will give it another try thanks.
ned02
10-24-2008, 06:25 PM
OK I did the hammer thing then put the socket on the breaker bar and gave a tug ,nothing, put my foot on the peg gave a huge tug and went flying backwards across the patio!nut is off thanks for the suggestions.
tyman2395
10-24-2008, 08:44 PM
glad to hear that it worked