Part Out Complete Aftermarket Trx 250r

[stever250r]

This was a complete frame up scratch built project. Majority of the parts were purchased new and only have 20 -30 hrs of use. Parts that were purchased used, were rebuilt and recoated.

PRICES FOLLOWED BY AN "S" INCLUDE SHIPPING.

Bike is still complete and I work out of town...so please be patient and allow me time to disassemble and ship. My paypal is
Skidaclifs@aol.com Please include your name, address and what you purchased so I can keep items and purchasers in check.


"UPDATED LIST>>>THIS IS WHAT I HAVE LEFT"

"MAKE OFFERS>>> THIS STUFF NEEDS TO GO"



Swingarm: Houser (bought new..30 hrs tops.) $350.00

Locknut: Lonestar anti-fade (used but works) $40.00"S"

Rear Hubs Stock (new powdercoat) $35.00"S"

Levers... RTC.. (bought new) $50.00 "S"

Nerfs: X-Factor $70.00

Bumper: AC $50.00 "S"

Grab Bar: $25.00 "S"

Rear Shock: TCS (new rebuild.. bumper missing) $200.00

Front brake lines stainless $40.00"S"

Rotors F|R: Stock $25.00"S"

Rotor Rear.. New in box... $40.00 "S"

86 Airbox Boot .......$20.00 "S"

Tires F|R: Grooved Radials 20x6-10 front $ 50.00 ****PENDING**** FL-R

Grooved Turf Tamer 18x 9.5-8 rear $35.00 *****PENDING**** FL-R

Plastic: Fullbore Orange Race cut Front and Rear (bought new looks new ) $375.00

Fullbore Chrome Cover (bought new looks new) $65.00

Fuel Tank: Stock.. 86-87 petcock included $40.00

Carburetor: PWK 38 Air striker $ 130.00"S****PENDING*** Ryan C.

Boyesen RAD Valve with new reeds (no boot) $50.00"S" ****PENDING**** Ryan C.

Billet brake line clamps $15.00 "S"

Motoquad billet gas cap and short vent $40.00"S"

Billet shorty shifter $20.00"S" ****PENDING**** FL-R

Pro design kill switch and tether $25.00"S"

TM Design Works Chain Slider, Roller (like new) $65.00"S"

Aluminum Shrouds and Radiator Louvers $ 40.00 "S"

Radiator.....$40.00 "S"

Stock Coil... (bought new) $25.00"S"

Front Calipers (new powdercoat) $80.00 "S"

[Flyin_250r]

Interested in axle, rear hubs and carrier. If i could get some pics and price shipped to Ontario Canada sent to

atc250r85@hotmail.com

Thanks, no rush i read the post and am patient, might be interested in more but thats it for now.

Take care

[stever250r]

I will get you some pictures this weekend, and see about shipping to Canada.

Thanks.

[matt250r21]

I'll take the Sparks TT pipe and silencer. Could you let me know about shipping to V.A.

[kota0216]

hi, id like more info on the shortie shifter and axle.
dose the axle come with everything on it?
can i get pics of the shirfter and axle?
email is ollie0216@aol.com
thanks

[LAEGER525]

Do your IMS pegs have kick-ups..? If they do I will buy them. Please send me your Paypal info....THANKS!

[kota0216]

intersted in rims all around also!
thanks

[kota0216]

intersted in rims all around also!
thanks

[LAEGER525]

I will buy the front rims...if kotao216 does not buy them..?

[badtothebone250]

Interested in a arms and front shocks. Tried to send pm but inbox is full.

[Master LTR450]

Originally posted by badtothebone250
Interested in a arms and front shocks. Tried to send pm but inbox is full.

Hey his PM's dont work shoot him an email stephen.roark@sikorsky.com awesome guy to deal with here fellas and he is parting for a very good reason so lets help him out!!!

[danhung11]

Emailed you!

[stever250r]

Thanks all,

I believe I replied to all my emails this morning. If I missed someone please email me at work, stephen.roark@sikorsky.com.

Laegers,

The Roll Design Pegs do not have the kick ups, but do a great job of holding your boots where you put them anyhow. Let me know if you are still interested. Let me see if Kota0216 gets back to me
about the Rims. If not and you really want them... they will be yours.

Bone,
Front A-arms and shocks are still available. Let me know if you want them.

Ive updated the list again, so please check for the items that are still available.

Thanks everyone.

Steve

[mdickerson319]

What bore is the cylinder on? I saw in other thread where you said piston hit the head. Does it need any other work bedsides piston and rings? ANy porting done to it?

[stever250r]

Piston is Nikasil, so it can not be bored.

It is at 68.50mm... 265. They cylinder is ready to go. Just needs piston, rings, o-rings for head. I have the old o-rings ill include, they still look fine to me.

It is ported for MX.. mid to top. Neil took a look at the port work when I sent it to him to have it re-coated and he said it looked good, so I didn't have him mess with with.

[mdickerson319]

Emailed sent about cylinder.

[ZSNOW]

i want the rear rims and tires..

[stever250r]

Hey all... I am at home now and cant figure out how to get to my work email from my home computer. DUHHHHHH

Sorry about that. I am trying my best to keep track of what everyone has asked for.....pictures.... etc etc.

Rob, I got the rest of your payment... thank you.

Parts that have already been purchased and paid for will be mailed out Monday. I do have that list.

If anyone needs to get in touch with me this weekend.. please email me at this email...... sroark@belcan.com or post to this thread.

I have several people interested in the rims so I am going to try and post some pictures some time tomorrow.

Thanks again,

Steve

[DB 450R]

email sent

[Pro1200]

how much for Radiator Louvers??

[stever250r]

PRO.. you can have the louvers for 15.00 shipped.

[jrspawn]

Payment sent for Front and rear beadlocks.

Thank you
Justin

[Glamis400ex]

got a pic of the chain roller?

[kota0216]

hi, id like more info on the shortie shifter and axle.
dose the axle come with everything on it?
can i get pics of the shirfter and axle?
email is ollie0216@aol.com
thanks

[DB 450R]

Did you get my email? havent heard back from you.

[stever250r]

Ollie,

The axle will only have the sprocket hub and sprocket.

The shifter is a Pro Design Billet Aluminum shorty shift lever. Splines are in great shape and it polishes out nicely. Let me know if you want them.. I havent had the time to get pictures. If you decide you want them and arent happy you can return them for a refund.

Darry,

I got your email, I need to find out the approx weight of the bottom end to get you a better shipping qoute. I also owe one to DHUNG. I will try to get back to both of you with that info as soon as possible.

[stever250r]

Just an update for everyone.

Rob G... your parts have been shipped.

Matt R. your parts have been shipped.

Roger P.. your parts have been shipped.

Justin.... Parts will be shipped...NLT Nov. 3rd.

Casey.... Parts will be shipped NLT Nov. 3rd.

Michael... .Parts are rdy to be shipped as soon as MO arrives.

Frank... Parts are rdy to be shipped as soon as MO arrives.

Thanks everyone. I hope you enjoy the parts.. Much more that needs to go.. take a look at the list.

I also appreciate everyones patience... this working away from home stuff stinks.

[Master LTR450]

hey steve give me a call if you can i sent you an email with my number. thanks

[stever250r]

Rob, you must have sent it to my work email that I cant access from my home computer.. I will be back in the office on Monday afternoon, or you can email me at sroark@belcan.com

Casey, Brian, and Justin.... your parts will be shipped first thing tomorrow morning.

Frank.... Ive never recieved payment for the carbeurator... Are you still wanting it?

Thanks,

Steve

[partyboy300ex]

is the swing arm +1 or+1 1/4 or stock or short?
and what would be your price on the axle, carrier, alxe nut, and swing arm shipped to 52585?
Thanks Aaron

[DB 450R]

Did you forget about me?

[stever250r]

Aaron, the swingarm is 1988 stock length. Let me know if you are interested in a package deal.

DB450R, Ive gotten so many emails I must have forgot.
What was it you were looking at? Sorry about that.

[imprezkid]

Can i get some pictures of the frontend. What is the setup of the shocks? weight? Need rebuilt?
thanks
tanner

tlane_take2@hotmail.com

[Master LTR450]

Hey steve i talked to c&r and forgot to ask!! but also do you still have the m/c cover?

[stever250r]

Rob....Yes, I still have the rear M/C Guard. Let me know if you want it.


Kid.. I've been promising everyone pictures and still have not gotten them. I will do my best this weekend to get some updated pictures of the parts that are left.

The shocks are LT 19.25" on +3 arms. I am about 180 lbs and they seemed a little soft for me. They are in great condition and will not need to be rebuilt.

[thegreenone]

Iwas wondering the shiping on the nerfs and the rear grab bar to 62223

[400ex28]

Would you happen to have a radiator? thanks.

[stever250r]

green... I could ship the nerfs and grab bar for 25.00... If its less I will refund you the difference.


400.. yes I do have a radiator. Slightly dented on one side from being hit but does not leak and still cools just fine. $50.00

[Swiper77]

stever250r thanks for the stem and bars. I appreciate you getting them to me quickly.

[trx250rider]

steve..great seller..is your list updated, might want some more..

[400ex28]

Originally posted by stever250r
green... I could ship the nerfs and grab bar for 25.00... If its less I will refund you the difference.


400.. yes I do have a radiator. Slightly dented on one side from being hit but does not leak and still cools just fine. $50.00

Would you have a picture by any chance?

[stever250r]

400...I'll work on getting a picture this weekend. Im actually going to take a few days off work.


The list is up to date... Just let me know what you need or what you want... I have several things that are not listed yet... like spindles, air box boot, fender mounts, exhaust mounts, etc etc etc.

Just ask if its not on the list.. I might have it.

[doc-bones]

How long are front shocks eye to eye? Clean out your message box.

[stever250r]

Doc,

I think shocks are 19.25" eye to eye but I will measure to make sure and update it here to let you know.

You have to email me at sroark@belcan.com.... my PM box is empty but hasnt worked in months!!!!

[Master LTR450]

hey steve i will take the m/c cover

[stever250r]

Got it Rob. I'll get it rdy for you.... That Gas cap sure would look nice on your quad :)

[Master LTR450]

haha if i didnt just buy a new project 321 i would grab it from you. i will send you that money in a little. hey whats your ebay name? i wanna see if i can contact that place you got the hubs from or can you give me there contact info?

[heelclickinonaR]

Steve, are the A-Arms and Shocks still available?

Thanks, Mike

[Elduner]

Sent email on gas tank.

[stever250r]

Heelclick
Yes.... the A-arms and shocks are still available. Let me know if you want them.


Elduner
I will return to work tomorrow and check my email about the gas tank. If you want it.. I can ship it out this coming weekend.

Thanks,

Steve

[mrcbr76]

Payment sent for the Axle and Carrier.

Thanks,
Mike

[bananas]

PM full

Rear Caliper ( with block off) $ 65.00 "S"


Is this sold?

My email is tbananas@gmail.com

If it isn't give me your email for paypal if you take..

Thanks

Troy

[stever250r]

Mike C..... The axle and carrier are rdy to ship. 11-17-08 Thanks for the payment.

Mike W.... The A-arms and shocks are rdy to ship, 11-17-08

Rob G...... The M/C Guard is rdy to ship... 11-17-08


Bananas... I still have the rear caliper. It is yours for 65.00 shipped.. or 75.00 shipped with new brake pads that were just installed. Paypal is Skidaclifs@aol.com

You all be sure to let me know when parts arrive. Thanks. again''
everyone.

[bananas]

Money has been sent...

Thanks

Troy

[stever250r]

Got it Troy... I am back in Lexington, KY for work.. so I will not be able to ship it out before this coming weekend.

I will send it priority. Thanks.

[FATANDFAST]

Can I get a picture of the levers and kill switch? charlie.gram@hotmail.com. Thanks.

[mrcbr76]

The Axle and Carrier arrived. Thanks!

Mike C.

[FATANDFAST]

Please send pics of the levers to charlie.gram@hotmail.com. Tried to PM you, but your box is full.

[stever250r]

Charlie, sent you an email.

Bananas, Your caliper should ship today or tomorrow. Sorry for the delay.

Mike, Glad you got the axle and carrier. Hope you are happy with them.

[FL-R]

what color are the +3 brake lines, and does it comes with the line that goes to the brake res- on the bars. What brand is the shorty shifter, and is the kicker avalible and what cond- and price for it.

[stever250r]

FL-R The +3 Brake Lines are Charcoal with Red Ends, and yes they include the line that goes to the Resevoir on the Bar. The shorty shifter is Pro-Design. I have the kicker but it needs to be rebuilt. It has quite a bit of slop in it.

Let me know if you want this stuff.

[96_banshee_96]

Steve250r Your PM box is full......

I might be interested in the rad valve and carb.

[Master LTR450]

Originally posted by 96_banshee_96
Steve250r Your PM box is full......

I might be interested in the rad valve and carb.

Hey his PM's dont work shoot him an email stephen.roark@sikorsky.com awesome guy to deal with!!!

[shok47]

Do you have a block off plate for the brake caliper?

[stever250r]

banshee,,, I still have the Rad valve and carb. Please email me at the address that master posted.

Shok... sorry but the blockoff plate was sold with the rear caliper.

[Master LTR450]

Shok since Steve doesn't have one I figure it will be alright to let you know I have a new Duncan one and a plain billet one too.

[96_banshee_96]

E-mail sent....

[FL-R]

Hey man do you still have the front and rear tires and the shifter. Ill take both and the shifter, How much shipped to 33594

[96_banshee_96]

Dont know where he has been. Im interested in the carb and rad valve havent heard back from him lately

[stever250r]

Sorry all.... I went to my fathers house in WV for Thanksgiving and just got back.

Hes an old timer and doenst have a computer or internet services at his house. He refuses.

Anyhow, I am back now and will try to catch up on my emails.

Banshee,,, I replied to your email, I will mark the carb and rad valve as sold.

FL-R... I still have the tires and shifter. I will mark them as sold also. I will have to look into the cheapest shipping method for you. Would you be against me shipping Greyhound? Might take a few days longer to get to you, but that would be the cheapest. Its up to you, just let me know.

Troy,

My wife has been handling the shipping of parts while I am out of town at work. She forgot your caliper... It was mailed Priority Saturday. I apologize for the delay. If you see something else you are interested in, shoot me an email, and I will make you deal since I dropped the ball on shipping the caliper out quickly. Again, sorry for the delay.

[FL-R]

If you could get a price on both, greyhound and UPS, prob UPS their isnt a greyhound station around where im at. Thanks

[trx250rider]

check pm

[stever250r]

Originally posted by trx250rider
check pm


PMs dont work.. .please email me at stephen.roark@sikorsky.com

[trx250rider]

email sent..

[bananas]

Thanks Got it last night..

You forgot the pads...

[stever250r]

Originally posted by bananas
Thanks Got it last night..

You forgot the pads...

Glad you got it... sorry for the delay....

There must have been some miscommunication... The pads that I was referring to are on the caliper.... I put them on, before my last race and only road practice and 1 lap of main before my bottom end went out.

I said new, but yes, they were installed and used for maybe 20 min.

My mistake, I will send you back $12.00 to your paypal, for the extra I charged you for the pads and your paypal fees.

Its on its way.

[bananas]

No big deal.....

[dustinshuler]

pm box full!!! very interested in plastic and tank cover.what is your bottom dollar? not trying to low ball you just stepping out on a limb with orange platic. James Perry owner of JPMX bikes and parts in bowling green ky had a leager that had orange fullbores and a black frame and a JPMX graphics kit one time and it was sharp.

[stever250r]

Originally posted by dustinshuler
pm box full!!! very interested in plastic and tank cover.what is your bottom dollar? not trying to low ball you just stepping out on a limb with orange platic. James Perry owner of JPMX bikes and parts in bowling green ky had a leager that had orange fullbores and a black frame and a JPMX graphics kit one time and it was sharp.

Dustin

My PM box doesnt work. Please email me at stephen.roark@sikorsky.com.

I love the look of the orange plastic. Im not sure I could go much better on the price, but I will think about it...

Shipping is what concerns me most.. I shipped a rear piece of fullbore plastic to CA and it cost me $50.00.

The plastic is still MINT... as close to new as you could get!

[stever250r]

Originally posted by bananas
No big deal.....

Thanks Troy.. but its a big deal to me....

Money has been sent back to your paypal... sorry it didnt get it done yesterday... i got really busy and had some work that had to be completed before I went home.

Thanks for being so patient.

[bananas]

Rear Shock: TCS (new rebuild.. bumper missing) $200.00???

Is it long travel? What weight was it rebuilt for? Do you have any idea which one it it from TCS?

Thanks

Troy

[stever250r]

Originally posted by bananas
Rear Shock: TCS (new rebuild.. bumper missing) $200.00???

Is it long travel? What weight was it rebuilt for? Do you have any idea which one it it from TCS?

Thanks

Troy

Troy,

Its the older version TCS rear shock. I bought it used off of a member on here and then had it rebuilt by Steve Ezell at Pro Action Sports of Kentucky. I just had him tear it down, and replace oil and seals, I didnt have him revalve it, so I really have no idea what weight it is valved for. Im about 180 and it seemed to work ok for me.

I really dont know that much about it.. except that it seemed to work ok for me, and didnt leak.

It is NOT long travel.

The bumper was dryrotted and ended up busting off after a few races.

I owe you a deal.. so make me an offer if you are interested.

[FL-R]

Hey man did you ever get a shipping quote on those front and rear tires, and shifter shipped to 33594

[!LL W!LL]

can i get pics of that tcs rear shock and is it link or no link shock??

and what year 250r is it for as well??

[stever250r]

FL-R... I wont be able to get a shipping quote until I get home this weekend. I'll have you one on Monday.

Will,

I'll get some pictures of the shock while Im at home this weekend.
I didnt know there was a difference in the shocks between years.
Only the length of the dogbone on the rear link.

I had it mounted on aftermarket frame.. 88 style, using a 88 rear link... (at least I think it was an 88 rear link)

[FL-R]

Ok thanks

[stever250r]

Update.


Mike Wilson... the seat is rdy and should be shipped today.

Mike Dickerson... the seat latch is rdy and should be shipped today...along with the rear brake master cylinder.

Troy, Im working on shipping for your parts now.

FL-R--- I have your shipping quote... please email me.

Banshee, I have pictures of carb and rad valve, I marked them as sold, do you still want them?

[drtrider145]

do you still have the nerf bars
and will they work with standard stock pegs shipped to 85340

[stever250r]

drtrider...

I still have the nerf bars... I imaginge that they would mount on stock pegs... you may have to drill mount holes in the pegs.. .Im really not sure. I can send you pictures of how they mount this coming weekend.

For those who have Pending parts... please get back in touch with me so I know if you still want them.

To all,

The original list is now updated.. and easier to read..

Please make offers I need to move the rest of these parts.

Thanks,

Steve R.

[koh0001]

what color and shap is the bumper, and grab bar?? are they both AC ??

[2-330s]

what rear brake pedal do you have and is it a short (pro pegs) length,how much?

[stever250r]

Bumper is A/C Im not sure what the grab bar is..

The bumper is in good shape.. look at the picture on the first post.



I dont have a rear brake pedal... It was sold with the frame.

[Master LTR450]

steve send me some close up pics of the nerfs mounted on the pegs and frame. I may want them if they would work!! if you dont still have my email its rg0522@gmail.com Thanks Rob

[AB250R]

WHAT PARTS DO YOU HAVE LEFT FONT WHEELS AND REAR? A ARMS? LSR LOCK NUT? BRAKE LINES BRAND ? MOTOR?

[250r morphidite]

you still got the front calipers i may want them if i could see a pic please!!!!! stovetop18@yahoo.com thanks

[stever250r]

ABC250R... I still have the LSR Anti Fade Nut.... and the Brakelines. Galfer... smoked lines with adodized red ends... for +3 Front end.


Morphidite.... I still have the front calipers... I'll get you a pic this afternoon..


Master.... I still have the Nerf Bars... I'll get some pictures of how they mount to the Frame and Peg.

Thanks all,

Steve

[partyboy300ex]

I am very interested in a few parts if you can get me some pics i will probley buy them. I have a few questions also is the swing arm a no link swing arm?
are the bearings good in the swing arm
what shape is the axle lock nut in?
Are the nerfs propegs?
My email is seedman24@hughes.net if you can send me some pictures that would be great
Thanks
Aaron

[stever250r]

Partboy, I will take pictures again this weekend. I bought my wife a new camera for Christmas.... at least thats what she thinks anyhow... :)

The swingarm will require a link.. it is not a no-link. The bearings in the swingarm are good.. .It only has about 30 hrs on it... if that.

I bought the axle lock nut used, but its still in decent shape and works fine.

The nerfs are not propegs.

[FL-R]

Hey man I never got that quote on the front and rear tires, and the shifter, shipped to 33596. PM it to me, email is not working

[brymillen]

still have the chain slider?

[jbltz450]

are the orange fullbore fenders still for sale?

[trx250rider]

thanks steve...got the bottom end yesterday..are we still making a deal on the calipers?

[heelclickinonaR]

Hey Steve,

I didn't get my seat, I got someones seat latch and rear master cylinder. Looks like you sent it to the wrong Mike.

[mdickerson319]

That would be my seat latch and rear master! I would guess that the package I have waiting at the post office is your seat!

[heelclickinonaR]

Originally posted by mdickerson319
That would be my seat latch and rear master! I would guess that the package I have waiting at the post office is your seat!

I guess we can work something out. I can send you your parts, just PM me your address and I'll ship them to you. And you could refuse the package at the Post Office and it will go back to Steve, who can re-mail it to me. Hopefully, he will check his email and get back to me soon.

Thanks, Mike

[stever250r]

Mike D and Mike W... I am sorry about the mistake with shipping.. My wife obviously mixed the two addresses up.. If you two could mail each other the correct parts I will gladly reimburse you for the cost of shipping. I will not be at work this week so you will need to contact me at sroark@belcan.com.or call me at home 270-886-2867... I feel terrible... sorry again.

Roger... your calipers will be mailed out tomorrow.

FL-R... shipping for the tires and shifter will be 45.00

Mike C. and Charlie G. the levers and brake rotor are on the way.. they were shipped to Mikes' address... I lost your address Charlie... sorry.

JBL... I still have the fullbores.. THEY ARE MINT!!!!

Brymillen.. I still have the chain slider and rear lower rollers... TM Design Works... MINT

Contact me at sroark@belcan.com or call me at 270-886-2867 or 270-331-0362 if anybody wants parts or needs to get in touch with me..

Mike D. Mike W.... Sorry again.. I'll scold my wife for the mistake.

Thanks all,

Steve

[JIMFROMTEXCO]

if the sale of your carb and the rad valve fall threw let me know i will take them.

[stever250r]

Jim,

It looks like the RAD valve and Carb are still for sale... If you want them let me know

Steve

[JIMFROMTEXCO]

pm me a price

[stever250r]

ALL REMAINING PARTS THAT HAVE NOT BEEN SPOKEN FOR OR SOLD ARE NOW LISTED ON EBAY. I WILL NO LONGER BE RESPONDING TO THIS THREAD.

YOU CAN SEARCH REMAINING PARTS ON EBAY (WITH PICTURES) UNDER MY WIFES USERNAME>

08shopping4deals.

Thank you everyone, who has purchased parts.

Happy New Year to all.

Steve

[unit32]

I know you said to search on e-bay but could not find your wifes name. You still have the plastic and carb?