ALL PEOPLE WITH XR 400 cams!!

[raptor_02]

how much did the xr400 cam cost???
did it help alot???
would u recommend me getting it???

[RAPTORAZ]

The specs between the XR and EX cams are very similar. I didn't notice much of a difference when I put an XR in my stock pistoned EX. It gave it just a little more mid-top. You're better off going with a higher compression piston and a Hot Cam.

[VegasEx'r]

The Hot Cams are about the same price, and they will give you more power than the xr cam. If I remember correctly, I paid 140ish for the xr cam & 135ish for the Hot Cam.

[CranMan]

I paid $130 and no core charge. I did the cam at the same time as the 416 11:1 rebuild. All together @350$ and very much worth it!

[KAWSAM62]

with the hicomp 416 with a hotcam or a xr400 cam do you need to use higher oct than 92 pump gas?:confused:

[YZROOSTINYA]

i run 93 and 94

in the summer i will mix 1 gallon 108 to 4 galln 93/94

[DEAL]

Hotcams stage 2 have considerably more lift than the Xr cam, The stage one is almost the same cam with a lil more low end.

PUt it with a higher comp piston and it's worth the money i think..

[raptor_02]

i was also thinking about getting the CURTIS SPARKS drop in racing cam. Its 159 bucks. He also has a aggressive racing cam but it's out of my price range at 350 bucks. Also what would be the best compression ratio i could run to get the most power and still be able to run pump gas with a 416 piston???

[RED121572]

I had an XR cam for a brief time. It woke up the bottom end, but it lacked in top end pull.

The hotcam stage 2 sounds like a good one. I dont have one cause they didnt come out until after I installed my present cam.