Front end alignment

[yernkie]

What is the best way to perform this? Mine is off a little. Is there a measurement to use, or ???

[lilyamaharacer4]

Use bare rims and play around with it until the measurements from front to rear of the wheels are the same.

[leasureryan]

you don't have to use bare rims. Just measure from the center of the tread pattern on left, to center on the right...in the front, then measure the same way in rear. You want measurement very close. 1/4" off won't hurt anything

[Darebee]

I believe the actual specs call for 1/4" toe in.
Has to do with the geometry during bump-steer.