laeger arms confused

[spearman_929]

i just bought a set of laeger a arms and they have a fork on the bottom arm and i know it goes on the spindle but im not sure how. oh by the way these are going on a 400 are the spindles the same?

[400exrider707]

Originally posted by spearman_929
i just bought a set of laeger a arms and they have a fork on the bottom arm and i know it goes on the spindle but im not sure how. oh by the way these are going on a 400 are the spindles the same?


Please clarify this or post a picture. What do you mean by fork.... if you're talking about what I thinking, it's a T-pin front end and you'd need the spindle that comes with the arms.

[bwamos]

That's what it sounds like to me as well.

[250Renvy]

Does it look like this?

http://i75.photobucket.com/albums/i289/250Renvy/For%20sale/DSCN3631.jpg

If so, you have protrax arms and if you don't have the spindles are SOL.

Nobody sells just the spindles and if you don't have a set, you'll likely have to buy a complete protrax = big $$$ or new spindles which go for $900 each.

[deathman53]

also you need the stem for a pro-trak also, very different tie-rods and ends.