PDA

View Full Version : True YZ Chassis, Gotta Go!


xrxmxcx
10-14-2008, 07:14 AM
Looking to move this to look into getting something else. Will include tons of extras to complete the build.

Frame/Subframe
Complete Intake
YZ engine harness
Custom Rath Heelgaurds
Custom Yoshimura Full Titanium exhaust
LSR Stem Clamp
Complete Oil Setup (Tank/Lines)
Cooling Lines/Fittings
All Hardware (Bolts/Nuts/Lugs)
Brake Pedal
Front 400ex Spindles/Stock Hubs
250r Gas tank

Looking for 1200 + Shipping, Make offers. Pictures are all available. You have seen these bikes the Red/Blue practice bike is what you see here.

Low hours on all these parts due to injury.
doc-bones
10-14-2008, 07:35 PM
Who`s frame is this?? LSR, WALSH etc? Is that exhaust custom built for YZ450F motor? Is frame 250R geometry?
xrxmxcx
10-14-2008, 07:50 PM
The question is up in the air, I bought it as a "Houser". Looking over it with a few people it looks to be Laeger but I didnt really get too in depth with it. Looks alot like an early Laeger YZ.

Built for 426, but 450 is an easy swap. Bike is 250r geometry.
doc-bones
10-14-2008, 08:05 PM
So the exhaust was custom built to fit 250R geometry with a YZ426?
I ask because I have a WALSH 250R geometry with a 03YZ450F motor using a SPARKS YFZ exhaust. Just curious if that exhaust would make any difference?
partyboy300ex
10-21-2008, 08:04 PM
Can i see a picture of all the parts
Thanks
ss440ex
10-21-2008, 08:38 PM
PartyBoy300ex...
Your mail box is full!
g9901920
10-27-2008, 03:44 PM
xrmxcx i pm'ed you i need to know where my parts are?
RMI_Speed
12-05-2008, 05:03 AM
can you mail me some pics and a price for the frame if you still have it pimped_wart_no2@hotmail.com
ZRider400
12-07-2008, 08:17 PM
email me some pics

bvcracing@gmail.com
racerx573
12-08-2008, 07:54 AM
Well if it's a Houser frame, it will have HOUSER cut into the front shock rails on the frame. LSR will have a straight bar across with star accents cut into the stem clamp post. Laeger's will have 3 holes cut if it is a wide frame, 2 if it is a narrow. Walsh is totally different and will have adjustable upper shock towers. Gibson will have GIBSON cut into the shock tower bar as well. Got pics of this frame? What kind of linkage does it use? Interested in a pic of the YZ intake.