Log in

View Full Version : Timing question


bvmracing
10-07-2008, 01:42 PM
We run a stock 08 DRX 90.

Has anyone ever damaged or had reliability issues by manually advancing timing a couple of degrees?

Thanks for your imput.
bulldogfallon
10-07-2008, 03:19 PM
Common mod...no issues if not advance too far
marsrace2
10-07-2008, 04:39 PM
will advancing it help the bottom end, and on the other hand will it hurt the top end?
bvmracing
10-07-2008, 05:26 PM
All I've heard is it helps bottom with no bearing on top end.
spider525
10-07-2008, 05:26 PM
is advaning done by drilling out stator plate and if so how much is too much? thx in advance:confused:
spider525
10-09-2008, 05:50 PM
:confused:
10-09-2008, 06:16 PM
Originally posted by spider525
:confused: pm you spider525
drxracing
10-10-2008, 12:44 AM
AH!!!!! COME ON LET US NO TOOOO!!!!!!
bulldogfallon
10-10-2008, 06:28 AM
There are various opinions on this, but I would say advancing it the distance of 1 more screw head, but I have seen further slotting than that.

You can also get a 4 degree advance key that will offset the flywheel and do the same thing...

Made for a blaster/banshee....may need a little filing to fit perfect though