PDA

View Full Version : WHAT rear hubs will change my rear wheel pattern size



86trizinger
10-02-2008, 08:20 AM
I have been told several different things and now I have all of these extra hubs laying around.

I have a 2003 TRX 90 and I am looking to change the rear wheel pattern. I am trying to confirm which hubs interchange.. SOmeone told me both the Kasea and Eton will work.. I am starting to think the Eton hubs will not work.

Please help.

qcitytile
10-02-2008, 01:18 PM
The spline on kasea axles is smaller than say a polaris. I do know that a 400ex hub bolts on to a polaris mini so Kasea hubs may work but the bolt pattern is 4/100. The eton is 4/110 but I dont know what size spline eton axles have. I bought a kasea axle to use for a polaris and our hubs were to big for the kasea axle. Then I got hubs off a kasea and the bolt pattern was wrong so that how I know. I have no experience with etons.

etondaddy
10-03-2008, 05:56 AM
Did you delete the post in the e-ton section...??

Here's what you need....

Mike Kozura

http://i58.photobucket.com/albums/g278/etondaddy/Picture050.jpg

86trizinger
10-03-2008, 06:49 AM
I didn't delete that post that I know of.. I went back to respond in there and I couldnt find it anywhere.

I havea friend that does Race Car fabrication.. He is supposed to stop by and see what it will take to make a new rear swingarm for the price of steel.

quadrider24
10-03-2008, 07:01 AM
Eton Rear hubs will bolt right on and make it a little wider and change the bolt pattern to 4/110.

etondaddy
10-03-2008, 07:07 AM
Originally posted by 86trizinger
I didn't delete that post that I know of.. I went back to respond in there and I couldnt find it anywhere.

I havea friend that does Race Car fabrication.. He is supposed to stop by and see what it will take to make a new rear swingarm for the price of steel.
Yea it's like gone.......not sure why the admin would delete it ?? whatever.

There yea go....if you change your mind let me know. If you need any help let me know.

Mike Kozura

86trizinger
10-03-2008, 07:08 AM
I was told the Eton axle is 24 spline... The honda is 20 spline.

quadrider24
10-03-2008, 09:07 PM
My son has both, a race Eton 90 and TRX90. I changed the Hondas rear hubs with an Eton set to run the same bolt pattern.

86trizinger
10-04-2008, 07:26 AM
What year honda and what year eTON.

quadrider24
10-04-2008, 04:35 PM
All the Eton Vipers 50/70/90 from 2002 to current are all the same. I don't know about the other Etons. I think the trx90's from 1996 to current are the same. I have a 2003, and a friend has a 1999 and they are the same. Hope this helps.