Valve shimming

[whiteclipse16]

Hey guys, the bike I was working on has a hot cam in it.
Not sure if there are multiple stages, the kid just said it was a hot cam.
He claims the specs to shim the valves to are different for that cam as compared to stock.
Is this true?
If so, does anybody have the specs?
Thanks in advance

[Colby@C&DRacing]

If this is on a 400ex these valves do not take shims they are a tappet style adjustment.

[katch26]

THE SPECS ARE ON THE CARD THAT COMES WITH THE CAM BUT THIS IS WHAT WAS ON THERE WEBSITE.......
stupid caps lock
Intake
Intake lift (mm): 9
Intake lobe center (degrees): 106
Intake duration (degrees at 1mm): 246
Intake valve lash (mm): 0.13
Exhaust
Exhaust lift (mm): 9
Exhaust lobe center (degrees): 107
Exhaust duration (degrees at 1mm): 246
Exhaust valve lash (mm): 0.15
Note: Divide mm values by 25.4 for inches.

[katch26]

stock is .004 (in)/.005(ex)
so hotcams is .005(in)/.006 (ex)