TRX 250R Part Out

[Pappy]

I had every intention of rebuilding this, however someone came by and bought most of teh parts I had for the rebuild:p

And as I get ready for my busy season, time wont allow me to do what i would like so I am just going to part it. Everything is up for offers, but please post here as I hate pm's!

I do not know what all is done to the engine, but it starts easy (good compression) and runs strong!

Burgard +2 Nickle plated A-arms
Burgard Nickle Plated Swing arm
Roll Pegs
ESR Pipe and silencer
Roll Bumper
Dirtfirst Wide Grab Bar
Works Front shocks
PEP rebuilt rear

I will get close up pics and more of whats available

[smokin250r]

how much u want for the rear shock and a arms? pm me please..

[Pappy]

Im open to offers....


I also have a Race Tech rebuilt rear shock $150

[RUTHLESS]

PRICE ON COMPLETE ENIGINE(DON'T NEED CARB, ELECTRONICS, OR ANY OTHER BOLT ONS JUST THE COMPLETE ENGINE)

PRICE ON FRAME & CONDITION

THANKS

[Pappy]

Open to offers....I hate pricing alot of stuff then going back and forth etc.

Frame isnt to bad, needs one motor mount crack fixed which I can do when I get it apart.


Front end

[Pappy]

Scoops

[Pappy]

engine

[Pappy]

roll pegs

[Pappy]

swing arm

[Pappy]

LSR axle?

Antifade

[Pappy]

ESR pipe

NOT SURE WHAT MODEL..ITS huge!

[Pappy]

ANOTHER SHOT FROM THIS SIDE

[Pappy]

silencer (would prefer to sell pipe and silencer together)

[Pappy]

seat is in good shape

[Pappy]

tank


fenders are in decent shape

tag bar adapters but stock stem

all the brackets and small parts etc ...all must go!

[Pappy]

.

[Pappy]

smokin250r here is the race tech

[no-luck]

ESR pipe

Highly interested in the pipe/silencer. How much do you want for it? $150?

[Pappy]

I am open to offers on all parts no-luck.

[smokin250r]

whats the ticket on the pep rebuild also? ill take the axle and i need the exhaust side radiator shroud bracket and do u have a chain buffer/slider the one that the swingarm bolt goes through?i also want the racetech ..waiting on a buddy to tell me if he wants the arms..

[smokin250r]

also how much for the clutch lever and on off switch?

[desertracr15]

ARE THOSE PEGS 86-87 STYLE AND ARE THEY KICK UPS IF SO WHAT DO YOU WANT FOR THEM

[Pappy]

Yes they are kick up style for 86-87

make an offer

[desertracr15]

75 SHIPPED WORK FOR YOU

[Pappy]

$85 shipped would make me a little happier:p Nevada will cost me a bit more etc.

I will start tearing her down tomorrow so if you want them, they should be off and ready in the next day or so.

[desertracr15]

DO YOU TAKE PAYPAL IF SO WHATS THE ACCOUNT

[Pappy]

bkperformance@peoplepc.com


Please reply back if you send it so I can mark them as sold. And also make sure your shipping info is included with the payment or pm it to me.

[pepshocks]

Originally posted by Pappy
Scoops how much for the scoops?

[Mxjunkie]

aarms are sold! Thx pap! :devil:

[desertracr15]

money sent for the pegs check your email

[no-luck]

$150 for the pipe/silencer? Not sure what shipping would be, I'm in NJ 07865.

[Pappy]

desertracr15, thanks!

no-luck, thats fine by me, hows $12 shipping?

[no-luck]

no-luck, thats fine by me, hows $12 shipping?
sounds good

[no-luck]

Money sent thx............exhaust is sold

[smokin250r]

check you pms..did u find a chain slider? paypal ready for everything

[Master LTR450]

Hey Pappy that pipe is what us 2 strokers call a ESR Trx5. :devil: Also im interested in the wiring harness. Is it hacked up at all?

[Pappy]

Originally posted by smokin250r
check you pms..did u find a chain slider? paypal ready for everything

I will check today, it was to late last night to go exploring the shop:p

[Pappy]

Originally posted by Master LTR450
Hey Pappy that pipe is what us 2 strokers call a ESR Trx5. :devil: Also im interested in the wiring harness. Is it hacked up at all?

OK, If it wasnt a LRD or FMF I dont know much about it:p I will check the harness for you

[Noff23]

how much for the swingarm what year is it for and is it stock length and what brand is it

[96_banshee_96]

What kind of rear tires are those. Turf tamers? What size? Any plugs? How much just for the tires Dont need the rims. And the case saver

[Pappy]

I reckon around $250 for the swinger. It appears to be about 1/2 shorter then stock and it is a Nickle plated Burgard

Rear tires are 18x9.5 x8 i will seperate but will need a few days to break them down etc


Pegs are sold and shipped

Pipe and Silencer are sold and shipped


Wiring harness looks to be in good shape and has the push button kill switch wired in.

Also appears to be a nice billet coil mount

[Master LTR450]

How much do you want for the harness pappy?

[96_banshee_96]

Ok so How much tread? Is there any Leaks/Plugs. Are they turf tamers? How much shipped? How much for the case saver also?

[Pappy]

Make an offer on the harness

I geuss around 70% or so on the tread, no plugs and they have been holding air without issue here. I reckon like $20 each plus $12 shipping. Yes they are turf tamers

case saver $15 shipped

[smokin250r]

did u find a chain slider?let me know about the other parts so i can send money

[Pappy]

Originally posted by smokin250r
did u find a chain slider?let me know about the other parts so i can send money

I did not find a slider but I am almost positive I have one. Just get a full list of what you want together and post it up.

[smokin250r]

is that a stock spring on the race tech shock? is 20 good for the chain slider? is it oem or neoprine or whatevr?

[Pappy]

I do not know what brand of springs were used when these were rebuilt.

If I have a slider, that will be fine, and it is some form of hard plastic.

[RUTHLESS]

pappy pm sent

please reply

thanks

[smokin250r]

do u have an extra front brake lever mount that the 2 bolts go through?

[Pappy]

Originally posted by smokin250r
do u have an extra front brake lever mount that the 2 bolts go through?

If you mean a front brake master cylinder, yes I have several.

[smokin250r]

i have the master cylinder i just need the back peice the bolts go through, u got 1?

[Pappy]

I will gladly check tomorrow for you

[smokin250r]

thanks so far my list is
axle
race tech rear shock
clutch perch
radiator shroud mounts
chain slider if u find it
and that peice for the master cylinder if u have one..
u sold the a arms right??
and on the axle it will come with sprocket hub right?
is that a stock clutch perch?

[Pappy]

its an aftermarket perch, I do not know the brand.

yes the arms are sold

yes the sprocket hub will be included with the axle. i will be taking the rear end apart tomorrow.

[smokin250r]

ok let me know if u find the slider i want to send u payment asap

[brandonpeake]

u still got the plastic or pep rear shock,
that was a nice looking R

[Pappy]

yes, i still have the rebuilt rear shock and fenders.


no prob smokinr

[desertracr15]

whats the info on the rear axle does it come w/ the anti fade, brake stay and sprocket hub is it a plus 1-4 and what brand

[Pappy]

the antifade will be sold seperatley. Im pretty sure its an LSR axle +2 +4 if I am not mistaken. smokinr has first right on it ofcourse, but im pretty sure he will be buying it

[smokin250r]

yea im buying it for sure pappy

[stuntin andy]

hey pappy im tryin 2 get my quad fixxed up some i can come visit yall lol but i need tires and rims have any you can sell me?

[Pappy]

mx or xc sizes?

[smokin250r]

pappy did u find that slider?

[Pappy]

Originally posted by smokin250r
pappy did u find that slider?

Yes I had a slider for you

I do not have the mount for the master cylinder, but everything else is ready to go at the price you pm'd me about. bkperformance@peoplepc.com is the paypal. Everything is pulled and ready to be boxed up pending payment.

[smokin250r]

pappy check your pm let me know asap paypal ready thatnks

[Pappy]

That will be fine smokinR

[smokin250r]

pappy money sent for
axle
clutch perch
shroud mounts
chain slider..

thanks

[stuntin andy]

mx or xc sizes?

lol i dident know there wAS A diffrance lol i just need rims and tires... ley me know pappy...

andy

[Pappy]

well, it depends on what type of riding you do, most mx tires wont do well on trails etc


i have a brand new (all 4) set of KFX 450 Tires and rims
some like new stock 300ex rear tires
maybe more...just depends on what your looking for

[stuntin andy]

i ride every thing lmao

[Pappy]

I geuss the new KFX tires and rims then, which I would like $400 for the full set

[stuntin andy]

wowo thats a bit much for me lol i was lookin for somehting cheap

[destey]

how much for the rear grab bar shipped to 05443?

[Honda5]

whats up?
what kind of fenders are they? what do you want for them and the stem?

[dbc112]

A-Arms? PM with price... Thanks

[Pappy]

I have 2 of the grab bars, 1 used($30) 1 new ($40) shipping will be $9

Honda5- looks like maier fronts and oem rears, hows $175 for the whole set plus the hood? You can have the stem, its a stocker since we probably wont be shipping etc. (you can just buy me a beer at lunch:devil: )


dbc112-arms sold already

[JIMFROMTEXCO]

shocks left?

[Cocoa_1]

What do you have left.

[Pappy]

Everything except....

A Arms
Axle
Raditor shroud mounts


Just getting started parting this puppy:p

[Cocoa_1]

I have a bare frame with a arms swingarm gas tank rear shock and plastic so i need steering stem tie rods with ends to start with for now. also if you have a rear grab bar a front bumper and nerfs let me know thanks

[Honda5]

when you get a chance shoot me some good pics of the rear plastics. I'm building a all oem 89' and trying to find some in good shape I'll pass on the fronts and hold that stem I do want it. tell me what you want for it without the fenders.
thanks dave

[smokin250r]

how much u want for the carrier..

[Pappy]

$57 shipped for the carrier(billet dual row). Looks to be in good shape and the adjusting holes arent egg'd out

honda5....hows $24 shipped on the stem and i will get some shots of the rears for you

[Cocoa_1]

I will take the carrier and the the stem if they pass on it let me know thanks

[Pappy]

The carrier is wide open, you want it youre more then welcome to it.

Honda5 is a personal friend so I am pretty sure he will take it.

[Honda5]

yes I will be takeing that stem off your hands as soon as I make a get a look at the rear fenders.

[troybilt]

still got the pegs? I didn't take the time to read thru all of the pages. will they fit an 89 frame? ...look like they were from an older frame but not for sure.

[Master LTR450]

pappy how much do you want for the wiring harness?

[Pappy]

Pegs are already sold

No clue on the harness, i dont know what R stuff has been selling for so im trusting in those that are into them to treat me fair with offers:p

[Master LTR450]

ok let me ask a question does the coil and cdi come with the rubber to mount them with? i dont really need the cdi or the coil but need the rubber. also would you sell without the coil and cdi or do you wanna sell it as 1? Can you post a pic?

[Honda5]

is that a stock shifter? if so put it with the stem
thanks dave.

[Pappy]

dave, no problem

i will sell just the rubber cover/mount if thats all thats needed

the cdi is mounted on a billet mount, I will get pics of it for you

[brandonpeake]

anything left? plastic by chance or shock?

[Honda5]

I need the shifter send me the price on it with the stem shipped and a paypal address. I'm going to go over it this week and see if I have any more stock parts I need and I'll let you know on any thing else I'm looking for. Are you anywhere near Romney Wv.? I might hit that that xc race on saturday.

[billyboy]

Pappy, I sent you a PM since it does not pertain to the sale of your 250R... Just wanted to let you know.

[smokin250r]

how much for the front rotors if there 4 holed ones..i need some for an 86

[Pappy]

brandon-still have the fenders but I have to get a pic up for honda5 as he was interested in the rears. I still have teh front shocks and both rears, but pretty sure the race tech will be sold.


dave- i reckon $10 for the shifter, $24 for the stem shipped, paypal is bkperformance@peoplepc.com. it would really depend on what direction you come for the xc race.

smokin-I will check on the rotors for you

[kushing]

Hello, I would like to buy your pegs, and the rear PEP.I will offer 50 for the pegs, and the shock 150- 200 depending on the condition. Let me know, Thanks Kushing

[wilkin250r]

I'm kinda interested in pictures of this "billet CDI mount", I've never seen one.

I'd also like more pictures of the grab bar. I've been thinking about getting a PRM Desert grab bar, and that one looks really similar.

[Pappy]

kushing-The Roll pegs are sold. $175 shipped(USA only) on the pep rebuild would work, just let me know.

Wilkin, very similiar, and I have 2 of them. I will get ya a pic.

[kota0216]

i want axle with ani fade
and possibly the a arms and shocks
tell me your price!
you can just pm me or send me an email
my email is
ollie0216@aol.com
thanks

[footy]

Is the rear grab bar avaliable?

[Pappy]

axle is already sold

anti fade is available $125 shipped

front shocks $370 shipped

A Arms- $225 shipped

I have 2 grab bars that are the same, one is used, one is new

Either for $40 shipped

[kushing]

Hello, Pappy I Pm'ed you and haven't heard back on the PEP rear, thanks

[footy]

Originally posted by Pappy


I have 2 grab bars that are the same, one is used, one is new

Either for $40 shipped [/B]

My 250R is a 1986 model. What years will these rear grab bars fit?

[trx310R#24]

what kind of coil an cdi is on the bike? o an stator?

[Honda5]

did you get the payment fot the stem and shifter? and where are my pics of the rear fenders? I know your not busy hahahaha!!!
just kidding I'm not in a rush for it just want to make sure you got the paypal.

[Pappy]

haha yeah I got it thanks!

I promise i will get some pics, this past week-10 days has been a little crazy and everytime I remeber to go get the pics i find myself in the middle of something stupid. im also trying to let cody do most of the tear down, trying to teach him some mechanical stuff etc so we have been working on it slowly and since the parts arent flying off it we have kind of been lax on it...lol

trx310r.....looks stock to me

footy-this is an 86-87 and i cant answer with 100% certainty that they would fit a 88-89 model. im not up to date on the R as its been several years since ive played with them.

[footy]

Originally posted by Pappy


footy-this is an 86-87 and i cant answer with 100% certainty that they would fit a 88-89 model. im not up to date on the R as its been several years since ive played with them. [/B]

OK sounds good. Can you send a photo of the grab bar to me at dtucker@goulston.com ? I assume you take paypal?

[thegreenone]

Do you still have the fenders

[brandonpeake]

okay if u got the plastic I will take the fronts rear hood and tank if we can work a deal on that,
I would be interested in the motor also do you know what bore its on or the port work etc?
i can paypal for the fenders if u still got them

[brandonpeake]

does the frame still have the honda tags on it or has it been pc'd before?

[Pappy]

frame looks to be just paint, not pc'd...i assume its factory paint

yes the fenders are still available, paypal is accepted

i have no info on the engine other then it starts on the first or second kick and runs strong. It does have a cool head on it.

Sorry for the delay on the pics, I have not forgotten, just havent had chance to take the tarp off of it to get pics (wifes grandmother has taken a bad turn and the family has been going nuts as they know the end is near:( )

[footy]

Sorry for the delay on the pics, I have not forgotten, just havent had chance to take the tarp off of it to get pics (wifes grandmother has taken a bad turn and the family has been going nuts as they know the end is near:( ) [/B][/QUOTE]

No rush on my end. I'm still looking for a rear brake rotor too. Do you have one?

[brandonpeake]

if u posted a price on the fenders hood and tank i missed it, would u pm me or post it please, i saw it mentioned several times but if there was a price for it all i must have missed it

[Pappy]

yes i have a rear rotor

brandon, i believe i replied to your pm


we did expierence a family loss as she passed away last night. i have to head to iowa and when i return next week i will get back on this thread with pics etc.

[footy]

Originally posted by Pappy
yes i have a rear rotor

brandon, i believe i replied to your pm


we did expierence a family loss as she passed away last night. i have to head to iowa and when i return next week i will get back on this thread with pics etc.

Sorry for your loss.

I now have a rear rotor but I am still interested in the rear grab bar.

[brandonpeake]

pappy I must have missed your PM, I am interested in several things but will have to choose depending on price.I am interested in the engine - please give price and what all is included, frame, and plastic

also when you get down to buts bols and misc brackets I would be interested in purchasing them as well, I am going to be building another 250 soon and I am sure they would come in handy

[footy]

Originally posted by Pappy
yes i have a rear rotor

brandon, i believe i replied to your pm


we did expierence a family loss as she passed away last night. i have to head to iowa and when i return next week i will get back on this thread with pics etc.

Hey I appreciate your time but I no long need the rear grab bar. The 250 is no long mine. Thanks.

[Js7bla]

How much do you want for the shock and what year is the atv

[Honda5]

pappy go ahead and send the stem/shifter I found a complete set with the calipers so I can just stick them on and go.
thanks dave

[Pappy]

Will do dave, thanks again!!:D

[snacob14]

seat still available?