PDA

View Full Version : Custom Made Shock Spacers for KingQuad, Vinson/Eiger



Xplocivic
09-26-2008, 01:54 PM
I am starting to make custom made shock/spring spacers for those of you that don't feel like making them or have the tools or time. I'm using Delrin injected Nylon plastic that is super strong and will hold up to the abuse. Adding these spacers is equivalent to purchasing and installing the HighLifter Springs, as they reduce the amount of sag that is inherent to the stock shocks, at the same time lifting the bike. I have 1" spacers on my bike and I got an inch of lift from them. The ride quality is not bad and you can still use your preload adjusters to fine-tune it for you. I can make the spacers any thickness you would like, but don't recommend going any bigger than 1 1/4", but I can make them bigger. This is a proven cost-effective method of getting some lift and tightening up the suspension. These also work on the Vinson/Eiger shocks as well.

If anyone is interested, PM me for details.



Here's some pics
Front
http://i61.photobucket.com/albums/h51/Xplocivic/DSCF1296.jpg

Rear
http://i61.photobucket.com/albums/h51/Xplocivic/DSCF1297.jpg

Rears
http://i61.photobucket.com/albums/h51/Xplocivic/DSCF1298.jpg