PDA

View Full Version : yfz, raptor, and banshee parts



es7200
09-26-2008, 01:19 PM
Cleaning out the garage. All prices are + shipping and OBO. No reasonable offer refused. Will send pics upon request.

Banshee parts
-fmf exhaust (good shape, little bit of rust not much) $120
-works front shocks(good compression, for flat track, 14.5 eye to eye) $75
-stock tie rods $10
-stock carbs(tors removed, no idle adjust screws installed) $80
-J-arms with lower a-arms(left j-arm has slight bend barley noticeable, a-arms have several holes for shock/ride height adjust, all have good ball joints) $80
-coil( one end is no good) $10
-stock pegs $10
-chrome boost bottle $10
-89 j-arm frame(good shape, little rust, only prob is that the right pipe that comes up in front of motor is smashed, very fixable with a welder) $50
-stock plastic radiator guard $5
-used 14 t front sprocket $5
-used 40 t rear sprocket $5
-stock blk plastic foot wells $20
-rear shock needs rebuilt $20
-complete motor(blown, right piston melted down and bottom case has a hole in it, only thing missing is clutch plates)$200

Raptor 660 parts(all off a 2005)
-stock belly skid plate $10
-stock swingarm skid $10
-stock exhaust $35
-stock headers $35
-stock front shocks $35
-stock oneway with gear(used but in good/usable cond) $120
-stock handlebars $20
-parking break lever $5
-parking break assy. w/cable(part that mounts to rear caliper)$20
-stock rear tires .5 in tread left $20
-stock a-arms w/ricochet skids(lower arms need new ball joints)$85
-stock gas cap $10
-stainless steel bake lines 51 inches long $25
-airbox lid w/snorkel $20
-plastic piece that key and lights go in(blue) $10
-stock cam(used but in great shape)$50

YFZ 450 parts(all off 2008)
-stock axle(like new) $80
-stock right upper and lower a-arms(orange, paint rubbed off on front of lower arm from riding in grass) $65
-stock left upper a-arm(orange) $35
-stock tie rods $15
-stock air filter $15
-stock head pipe $35
-stock front tires 3/8 tread left $20
-right side mud flap blk(attaches to heel guard)$5

450rcrazy022692
10-05-2008, 02:58 PM
pics of the FMF Pipes?

asohagan
10-08-2008, 02:19 AM
do you still have the works shocks for banshee

es7200
10-08-2008, 11:06 AM
shocks are sold

JTRAPTOR660
10-10-2008, 12:14 PM
will you sell the clutch basket and maybe inner hub by itself?