PDA

View Full Version : What TOOL ? (pilot screw)


MtnEX
09-23-2008, 11:08 PM
What can you buy that will allow adjustment of this screw while the engine is HOT?
leasureryan
09-23-2008, 11:14 PM
a 90 degree screw driver, carb tool. Can get them from parts unlimited, among many other places
MtnEX
09-24-2008, 02:41 AM
Yeah, 90 degree or close....

But it is going to have to be long, with a short 90 degree turn.
Something cable, gear or rachet operated from a distance.

I set it at 2 1/2 turns out when I put it back, but it wants to fire, then die. So I found a tool that I can use cold, but I'm not sure I'll ever get it dialed in that way.
leasureryan
09-24-2008, 07:45 AM
they are long....about 16" with a small 1" bend at the end. They are handy, don't know what I would do without mine
MtnEX
09-27-2008, 09:41 PM
Is this what I need?

http://www.jcwhitney.com/wcsstore/jcwhitney/images/imagecache/G_14175G_CL_1.jpg

I found that good image at JC Whitney...