size tires for GNCC

[quadric18]

Anybody can help me?

[LTandRaptorider]

20" rears, 22" fronts. Maxxis Razr2. ;)

If you don't want to go the expense of beadlocks, ITP Baja rims are good.

[quadric18]

Thanks you very much!!!

And the basic preparation for the GNCC on a LTR450, it is what?

You have photos of prepared LTR?

[LTandRaptorider]

Basic prep after tires... Skid plates. Especially rear skid. I spent the extra $$ and put a PRM rear skid on mine. Then full body skid. Some use a-arm skids, some don't. 13T front sprocket gives you a lil more low end grunt, which helps the LTR since it is geared for 18" rear tires. Oh, did you replace the stock crappy air filter yet? At least get a Twin Air or something like that, stocker lasts for one or two cleanings before falling apart. The list could go on, but this is basic. You will also need a kill switch if you dont have one. I recommend a Pingel for the LTR. Wires into the ignition wires on the handle bars, no worries about frying your ECM. Handguards are a big help...

[quadric18]

That what is that Pingel for the ltr450 ?

[LTandRaptorider]

Originally posted by quadric18
That what is that Pingel for the ltr450 ?

Pingel kill switch... It is the most expensive, $60 or so... But believed to be safest for your fuel injection computer. ;)

[quadric18]

You can show in photo what that is? Either a model?

[quadric18]

And that is of use to what?

[LTandRaptorider]

Originally posted by quadric18
And that is of use to what?

Don't have a pic of the kill switch. do a search on the internet. I think the company website is pingel.com

Kill switch you are wondering? It has a tether that you attach to your chest protector, pants, etc... If you fall off the machine, the tether pulls a switch, shutting off the engine. A kill switch is required at AMA sanctioned races, such as GNCCs.

[quadric18]

OK, I understood, in France we call up that one cut circuit!!!

Thank you for your advice.

[LTandRaptorider]

oui! :D