Bel Ray fuel mixter

[Snipe]

I am wanting to know if I should follow the instructions on the bottle. It sais mix 50:1 for most applications. I was wanting to know if that is how I should mix it for my new shee or not?

[cabex]

I used that stuff for a while in my yz250 but i mixed it at 32:1

[Toadz400]

I always mix it at whatever the oil calls for. 32:1 is still rich in oil. I've heard nothing but good things about running 50:1 high quality oils.

[martimatt550]

I second toadz motion......... 50:1 is sort of a standard for high quality oils.....just remember you can always go leaner, but it's usually to late to richen up...:( :( :( :( :(

[Toadz400]

Originally posted by martimatt550
I second toadz motion......... 50:1 is sort of a standard for high quality oils.....just remember you can always go leaner, but it's usually to late to richen up...:( :( :( :( :(

I was told by someone (never bothered to research it myself though) that running a richer oil mixture will actually cause you to run a lean fuel mixture. So in most cases it's usually best to stay in the middle. I would though run a 50:1 mixture with Amsoil or Klotz.

[Snipe]

the bell ray is a full synthetic fuel mixture oil and that is how the guy mixed it that raced so that is how im gonna mix it.

[Toadz400]

Originally posted by Snipe
the bell ray is a full synthetic fuel mixture oil and that is how the guy mixed it that raced so that is how im gonna mix it.

Yea I would mix it at 50:1 also, no worries there.

[martimatt550]

running to rich is bad !!!50:1 is good eespecially if the previous owner ran that mixture sucessfully.